Record Display for the EPA National Library Catalog

RECORD NUMBER: 33 OF 121

OLS Field Name OLS Field Data
Main Title Evaluation of geomembrane seams exposed to selected environmental conditions /
Author Curran, Mary Ann. ; Frobel, R. K.
CORP Author Bureau of Reclamation, Denver, CO.;Municipal Environmental Research Lab., Cincinnati, OH.
Publisher U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory,
Year Published 1984
Report Number EPA/600/D-84/079
Stock Number PB84-166842
OCLC Number 48112435
Additional Subjects Hazardous materials ; Linings ; Earth fills ; Seaming ; Polymeric films ; Water pollution control ; Durability ; Chemical compounds ; Physical properties ; Chemical analysis ; Plastics ; Elastomers ; Membranes ; Polyethylene ; Polyvinyl chloride ; Exposure
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB84-166842 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation 22 pages ; 28 cm
Abstract
The integrity of a geomembrane installation is no better than its seaming system. In an attempt to learn more about the strength and durability of presently available seaming systems, the Municipal Environmental Research Laboratory of the United States Environmental Protection Agency (USEPA) has funded research with the U.S. Bureau of Reclamation (USBR) to evaluate geomembrane liner seams exposed to selected simulated environmental conditions. A total of 37 combinations of reinforced and nonreinforced polymeric sheet materials joined by various seaming methods are being subjected to chemical solutions, brine and water immersion, freeze/thaw cycling, wet/drying cycling, heat aging and accelerated outdoor aging. Laboratory evaluation of the effects of environmental exposure will include before and after mechanical testing of seams (dynamic load, in shear and peel, and static dead load) and Gas Chromatography (GC) or Gas Chromatography/Mass Spectrometry (GC/MS) analysis of the polymeric materials. Immersion tests were started in the fall of 1983, however, at the time of this printing no comparative data were available for publication.
Notes
"EPA/600/D-84/079." Microfiche.