Record Display for the EPA National Library Catalog


Main Title Waste minimization assessment for a manufacturer of aluminum extrusions /
Author Kirsch, F. William. ; Looby, G. P.
Other Authors
Author Title of a Work
Looby, Gwen P.
CORP Author University City Science Center, Philadelphia, PA.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
Publisher U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory,
Year Published 1992
Report Number EPA/600-S-92-010; EPA-R-814903; PB92192137
Stock Number PB92-192137
OCLC Number 26274872
Subjects Waste minimization--Research. ; Aluminum--Finishing--Research.
Additional Subjects Hazardous materials ; Waste management ; Pollution abatement ; Extrusions ; Aluminum industry ; Research and development ; Industrial wastes ; Extrusion coating ; Manufacturing ; Painting ; Insulation ; Anodizing ; Waste recycling ; Waste utilization ; Electrostatic coating ; Water pollution control ; Waste minimization ; Source reduction ; SIC 20-39
Internet Access
Description Access URL
Library Call Number Additional Info Location Last
EJBD ARCHIVE EPA 600-S-92-010 In Binder Headquarters Library/Washington,DC 10/30/2017
EJBD  EPA 600-S-92-010 c.1-2 Headquarters Library/Washington,DC 02/27/2013
ELBD RPS EPA 600-S-92-010 repository copy AWBERC Library/Cincinnati,OH 10/17/2014
EMBD  EPA/600/S-92/010 NRMRL/GWERD Library/Ada,OK 12/28/2001
NTIS  PB92-192137 Some EPA libraries have a fiche copy filed under the call number shown. 07/26/2022
Collation 1 volume.
The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small- and medium-size manufacturers who want to minimize their generation of hazardous waste but who lack the expertise to do so. Waste Minimization Assessment Centers (WMACs) were established at selected universities and procedures were adapted from the EPA Waste Minimization Opportunity Assessment Manual (EPA/625/7-88/003, July 1988). The WMAC team at the University of Louisville performed an assessment at a plant manufacturing aluminum extrusions--over 10 million lb/yr. Aluminum parts are extruded and tempered followed by electrostatic painting, anodizing, or shipping. The team's report, detailing findings and recommendations, indicated that the most waste was generated by the painting process and that the greatest savings could be obtained by replacing the currently used paints with electrostatic powder coatings.
"EPA/600-S-92-010." "April 1992." Shipping list no.: 92-0392-P.