Grantee Research Project Results
In-Situ Containment and Treatment of Contaminated Sediments: Engineering Cap Integrity and Reactivity
EPA Grant Number: R828773C002Subproject: this is subproject number 002 , established and managed by the Center Director under grant R828773
(EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
Center: Organotypic Culture Models For Predictive Toxicology Center
Center Director: Rusyn, Ivan
Title: In-Situ Containment and Treatment of Contaminated Sediments: Engineering Cap Integrity and Reactivity
Investigators: Wiesner, Mark R. , Hughes, Joseph B , Valsaraj, Kalliat T. , Edge, Billy
Current Investigators: Wiesner, Mark R. , Hughes, Joseph B , Willson, Clinton S. , Valsaraj, Kalliat T. , Edge, Billy
Institution: Rice University , Louisiana State University - Baton Rouge
Current Institution: Rice University , Georgia Institute of Technology , Louisiana State University - Baton Rouge , Texas A & M University
EPA Project Officer: Aja, Hayley
Project Period: October 1, 2001 through September 30, 2006 (Extended to September 30, 2007)
Project Amount: Refer to main center abstract for funding details.
RFA: Hazardous Substance Research Centers - HSRC (2001) Recipients Lists
Research Category: Hazardous Waste/Remediation , Land and Waste Management
Objective:
Contaminant transport and fate in sediment caps is dependent on the structure of the sediment cap, which in turn depends upon the methods used to construct the cap. Current approaches to constructing sediment caps largely focus on stabilizing or isolating underlying contaminated materials. However, variations in current construction techniques may lead to variations in contaminant transport across the cap, as well as differences in cap aging, stability and permeability. The construction of second-generation "reactive" caps will likely require a more sophisticated understanding and control of the depositional processes involved in constructing a cap. This research will address fundamental processes controlling sediment deposition as they affect the engineering of sediment caps as currently practiced, and as applied to the development of advanced capping technologies. We will test the hypothesis that the surface chemistry of conventional capping materials can be altered to achieve a desired cap structure and/or reactivity.Approach:
A lab-scale flume will be constructed to study the effect of release methods, materials selection, and ambient conditions such as cross-flow and salinity on cap structure. Cap structure will be quantified in macroscopic terms using parameters such as permeability, porosity, and grain-size distribution. The micro-scale structure will be characterized in terms of the fractal dimension of the deposited mass. Experiments will be conducted under conditions of stagnant deposition (column studies) using suspensions of particles ranging in size from approximately 1 m to 1 mm. Mixtures of particle sizes will be investigated including deposition of fine particles onto a gravel substrate. Various surface treatments for the capping material will be investigated through the addition of polymeric materials. Changes in capping material surface chemistry (adhesion probability and adsorptive capcity) will be quantified.In parallel with this work, simulations of particle deposition will be performed using Lagrangian methods in which the trajectories of individual particles are calculated from second-law principles. This involves the integration of the individual stochastic equations for particle motion and the calculation of individual particle trajectories from randomly selected release points over the surface. Computer models based on Monte Carlo techniques will be developed to investigate particle deposition in 3-dimensional Euclidean space on a plane. Characteristics of the simulated caps will be compared with experimentally determined characteristics to better understand limitations in the numerical model. It is hoped that such a comparison will lead to reasonable predictions of deposit morphology as function of fundamental physico-chemical parameters for a given cap-forming technique.
Expected Results:
This work will allow us to form caps with a desired set of characteristics. Better control over cap formation and methods for constructing caps where the micro- and nano-scale properties of the cap can be designed will improve our ability to control transport and targeted reactivity of contaminants within the cap. Such improvements will allow for better long-term containment and remediation of hazardous materials in sediments.Publications and Presentations:
Publications have been submitted on this subproject: View all 20 publications for this subproject | View all 279 publications for this centerJournal Articles:
Journal Articles have been submitted on this subproject: View all 8 journal articles for this subproject | View all 63 journal articles for this centerSupplemental Keywords:
enhanced natural recovery, reactive barrier, confined aquatic disposal., RFA, Scientific Discipline, Waste, Water, Contaminated Sediments, Remediation, Environmental Chemistry, Analytical Chemistry, Hazardous Waste, Ecology and Ecosystems, Engineering, Hazardous, Environmental Engineering, contaminant transport, in situ remediation, contaminant dynamics, fate and transport , sediment caps, contaminated sediment, computer models, computer modeling, contaminant transport model, contaminated soil, kinetic studies, treatment, kinetic models, contaminant managementProgress and Final Reports:
Main Center Abstract and Reports:
R828773 Organotypic Culture Models For Predictive Toxicology Center Subprojects under this Center: (EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
R828773C001 Bioturbation and Bioavailability of Residual, Desorption-Resistant
Contaminants
R828773C002 In-Situ Containment and Treatment of Contaminated Sediments: Engineering Cap Integrity and Reactivity
R828773C003 Phytoremediation in Wetlands and CDFs
R828773C004 Contaminant Release During Removal and Resuspension
R828773C005 HSRC Technology Transfer, Training, and Outreach
The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Conclusions drawn by the principal investigators have not been reviewed by the Agency.
Project Research Results
8 journal articles for this subproject
Main Center: R828773
279 publications for this center
63 journal articles for this center