Main Title |
Inspection techniques for the fabrication of geomembrane field seams / |
Author |
Landreth, R. E. ;
Carson, D. A. ;
Koerner, R. M.
|
CORP Author |
Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab. |
Publisher |
U.S. Environmental Protection Agency, |
Year Published |
1991 |
Report Number |
EPA/530/SW-91-051 |
Stock Number |
PB92-109057 |
OCLC Number |
24262842 |
Subjects |
Sanitary landfills--Linings
|
Additional Subjects |
Inspections ;
Hazardous materials ;
Waste disposal ;
Lining processes ;
Seaming ;
Land pollution abatement ;
Quality assurance ;
Quality control ;
Construction ;
Guidelines ;
Specialized training ;
Manuals ;
Nondestructive tests ;
Field tests ;
Thermoplastic resins ;
Seams(Joints) ;
Adhesion ;
Environmental engineering ;
Performance standards ;
Geosynthetic materials ;
Land covers ;
Geomembranes ;
Capping ;
Extrusion fillet seams ;
Extrusion flat seams ;
Hot wedge seams ;
Hot air seams ;
Chemical fusion seams ;
Adhesive seams
|
Internet Access |
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
EHAM |
TD1064.I57 1991 |
|
Region 1 Library/Boston,MA |
04/29/2016 |
EJBD |
EPA/530/SW-91/051 |
|
Headquarters Library/Washington,DC |
03/10/2014 |
EKBD |
EPA-530/SW-91-051 |
|
Research Triangle Park Library/RTP, NC |
06/15/2001 |
ELBD ARCHIVE |
EPA/530/SW-91/051 |
Received from HQ |
AWBERC Library/Cincinnati,OH |
10/04/2023 |
DISPERSAL |
EMBD |
EPA/530/SW-91/051 |
|
NRMRL/GWERD Library/Ada,OK |
08/06/1993 |
ESAD |
EPA 530-SW-91-051 |
|
Region 10 Library/Seattle,WA |
04/22/2005 |
NTIS |
PB92-109057 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
xvi, 174 pages : illustrations, photographs ; 23 cm. |
Abstract |
The Technical Guidance Document is meant to augment the numerous construction quality control and construction quality assurance (CQC and CQA) guidelines that are presently available for geomembrane installation and inspection. It is focused on all current methods of producing geomembrane seams including HDPE and VLDPE, PVC, PVC-R, CSPE, CSPE-R, CPE, CPE-R, EIA and EIA-R. In general, the tone of most of the existing guidelines is to allow the installer almost complete freedom in making seams with the only conditions being that they pass: (1) destructive shear and peel tests to a stipulated strength, and (2) selected nondestructive tests. By developing a report somewhere between the typical CQC/CQA Documents and an installer's training manual, i.e., a 'Technical Guidance Document', it is hoped that this technical guidance document will provide meaningful insight for an inspector as to what the installer is trying to accomplish. At the same time, it might be also helpful to the installer in recognizing that others have an interest in their specific activity. After some introductory material, the manual presents six specific methods used for fabricating field seams of the types of geomembranes being most widely used for environmental control systems. They are the following: (1) extrusion fillet seams, (2) extrusion flat seams, (3) hot wedge seams, (4) hot air seams, (5) chemical fusion seams, and (6) adhesive seams. |
Notes |
"May 1991." "EPA/530/SW-91/051." "In cooperation with Risk Reduction Engineering Laboratory." "Project officers Robert E. Landreth and David A. Carson." "Cooperative agreement no. CR-815692." Includes bibliographical references (pages 163-164). |
Place Published |
Cincinnati, OH |
Corporate Au Added Ent |
Risk Reduction Engineering Laboratory (U.S.) |
Title Ser Add Ent |
Technical guidance document. |
PUB Date Free Form |
1991 |
Series Title Traced |
Technical guidance document |
Series Title Untraced |
Technical guidance document |
NTIS Prices |
PC A08/MF A02 |
BIB Level |
m |
Medium |
unmediated |
Content |
text |
Carrier |
volume |
Cataloging Source |
OCLC/T |
OCLC Time Stamp |
20160419142141 |
Language |
eng |
SUDOCS Number |
EP1.17:530/SW-91/051 |
Origin |
OCLC |
Type |
MERGE |
OCLC Rec Leader |
01414cam 2200361Ia 45020 |