||In-house test program report no. 6 : hot soak time constraints /
Rarick, Thomas. ;
||Environmental Protection Agency, Ann Arbor, Mich. Standards Development and Support Branch.
|| Standards Development and Support Branch, Emission Control Technology Division, Office of Mobile Source Air Pollution Control, Office of Air and Waste Management, U.S. Environmental Protection Agency,
Motor vehicles--Pollution control devices.
Air pollution ;
Environmental tests ;
Technology assessment ;
Test facilities ;
Time studies ;
Research projects ;
Automotive fuels ;
Exhaust emissions ;
Hot soak tests ;
Evaporative emissions ;
SHED testing ;
Sealed housing for evaporative determination
||EPA Evap 76-2
||NVFEL Library/Ann Arbor, MI
||Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy.
||1 v. (various pagings) : ill.
||The objective of the in-house evaporative emission enclosure (SHED) test program is to develop a concise, accurate and practical evaporative emission test procedure. One of the tasks identified for the test program was to establish a recommended time from the end of the dynamometer test cycle to the start of the hot soak evaporative emission test. The objective of this report is to use the collected data to establish the effect of the time between the exhaust emissions and hot soak emissions test phases on the measured evaporative emission levels during the hot soak and to recommend a time tolerance based on this information and practical considerations. The time tolerances of two operations prior to the hot soak evaporative emissions test were evaluated.
||Technical support report. "July, 1976." Includes bibliographical references. "Evap 76-2." "PB 270 689." Photocopy.
||Ann Arbor, Mich.
||Report on Technical Support for Regulatory Action.
|Corporate Au Added Ent
||United States. Environmental Protection Agency. Office of Mobile Source Air Pollution Control.
|Title Ser Add Ent
||Technical support report for regulatory action.
|NTIS Title Notes
||In-House Test Program Rept. no. 6.
|PUB Date Free Form
|Series Title Untraced
||Technical support report for regulatory action
|Ti Tra Differently
||Hot soak time constraints.
||13B; 13F; 68A
||PC A02/MF A01
|OCLC Time Stamp
|OCLC Rec Leader
||01524cam 2200361Ia 45020