Main Title |
Calcium Oxide Sintering in Atmospheres Containing Water and Carbon Dioxide. |
Author |
Borgwardt, R. H. ;
|
CORP Author |
Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab. |
Publisher |
c1989 |
Year Published |
1989 |
Report Number |
EPA/600/J-89/009; |
Stock Number |
PB89-236376 |
Additional Subjects |
Air pollution control ;
Calcium oxides ;
Sintering ;
Sulfur dioxide ;
Surface chemistry ;
Injection ;
Water ;
Carbon dioxide ;
Reaction kinetics ;
Catalysis ;
Porosity ;
Flue gases ;
Mathematical models ;
Furnaces ;
Reprints ;
Flue gas desulfurization
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
NTIS |
PB89-236376 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
10p |
Abstract |
The paper gives results of measurements of the effects of water vapor and CO2 on the sintering rate of nascent CaO, as a function of partial pressure and temperature using CaO prepared by rapid decomposition of CaCO3 and CA(OH)2. Each gas strongly catalyzed the sintering process and their combined effects were additive. A model formulated by R. M. German and Z. A. Munir in 1976, which describes surface area reduction by a single mechanism, is empirically modified to account for catalytic effects of the gas phase. Although multiple sintering mechanisms are apparently operative in the presence of CO2 and/or H2O, the empirical model correlates isothermal surface area reduction as a function of time over the temperature range of 380 to 1150 C and partial pressures of 39 Pa to 15 kPa. Porosity reduction was also accelerated by the presence of H2O or CO2 in the sintering atmosphere. In an atmosphere of simulated flue gas, porosity reduction followed the Coble logarithmic law during sintering at 800, 900, and 1000 C with induction periods of 6, 4.5, and 2.7 sec, respectively, for onset of particle shrinkage. Coupling the sintering model with a sulfation model that accounts for the effects of surface area allows the prediction of SO2 capture efficiencies in boiler furnaces by Ca(OH)2 injection. |
Supplementary Notes |
Pub. in Ind. Eng. Chem. Res., v28 n4 p493-500, Apr 89. |
NTIS Title Notes |
Journal article Oct 86-Sep 87. |
Title Annotations |
Reprint: Calcium Oxide Sintering in Atmospheres Containing Water and Carbon Dioxide. |
Category Codes |
68A; 99F |
NTIS Prices |
PC A02/MF A01 |
Primary Description |
600/13 |
Document Type |
NT |
Cataloging Source |
NTIS/MT |
Control Number |
931317674 |
Origin |
NTIS |
Type |
CAT |