Main Title |
Waste minimization assessment for a manufacturer of sheet metal components / |
Author |
Edwards, Harry W. ;
Kostrzewa, M. F. ;
Looby, G. P.
|
Other Authors |
|
CORP Author |
Colorado State Univ., Fort Collins. Dept. of Mechanical Engineering. ;University City Science Center, Philadelphia, PA.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab. |
Publisher |
U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, |
Year Published |
1992 |
Report Number |
EPA/600-S-92-035; EPA-R-814903; PB93123016 |
Stock Number |
PB93-123016 |
OCLC Number |
26987706 |
Subjects |
Waste minimization--Research--Colorado ;
Sheet metal working machinery--Research--Colorado
|
Additional Subjects |
Hazardous materials ;
Waste management ;
Metal sheets ;
Pollution abatement ;
Manufacturing ;
Assessments ;
Electronic equipment ;
Medical equipment ;
Painting ;
Degreasing ;
Anodizing ;
Protective coatings ;
Chromates ;
Waste minimization ;
Source reduction ;
SIC 20-39
|
Internet Access |
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
EHAM |
TD793.9.E32 1992 |
|
Region 1 Library/Boston,MA |
04/29/2016 |
EJBD |
EPA 600-S-92-035 |
c.1 |
Headquarters Library/Washington,DC |
02/26/2013 |
EJED |
EPA 600/S-92/035 |
|
OCSPP Chemical Library/Washington,DC |
10/05/2001 |
ELBD ARCHIVE |
EPA 600-S-92-035 |
In Binder Received from HQ |
AWBERC Library/Cincinnati,OH |
10/04/2023 |
ELBD RPS |
EPA 600-S-92-035 |
repository copy |
AWBERC Library/Cincinnati,OH |
02/01/2016 |
EMBD |
EPA/600/S-92/035 |
|
NRMRL/GWERD Library/Ada,OK |
12/28/2001 |
NTIS |
PB93-123016 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
1 volume. |
Abstract |
The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. In an effort to assist these manufacturers Waste Minimization Assessment Centers (WMACs) were established at selected universities and procedures were adapted from the EPA Waste Minimization Opportunity Assessment Manual (EPA/625/7-88/003, July 1988). The WMAC team at Colorado State University performed an assessment at a plant that manufactures precision sheet-metal components, primarily for electronics and medical equipment. Sheet metal is machined into desired components that are anodized or chromated if aluminum; degreased and painted if required; and assembled, inspected, packaged, and shipped. The team's report, detailing findings and recommendations, indicated that the plant could achieve significant cost savings and waste reduction by replacing its standard paint spray guns with high-volume low-pressure paint guns, thereby reducing paint overspray. |
Notes |
Shipping list no.: 92-0605-P. "EPA/600-S-92-035." "Sept 1992." |