Main Title |
Preliminary evaluation of a method using an FID for measurement of methanol in auto emissions / |
Author |
Gabele, Peter A. ;
Gabele, P. A. ;
Ray, W. D. ;
Duncan, J. ;
Burton, C.
|
Other Authors |
|
CORP Author |
Environmental Protection Agency, Research Triangle Park, NC. Atmospheric Sciences Research Lab. ;Northrop Services, Inc., Research Triangle Park, NC. |
Publisher |
U.S. Environmental Protection Agency, Office of Research and Development, Atmospheric Sciences Research Laboratory, |
Year Published |
1987 |
Report Number |
PB88-104344; EPA/600/3-87/035 |
Stock Number |
PB88-104344 |
OCLC Number |
759512855 |
Subjects |
Methanol as fuel--Research ;
Motor vehicles--Pollution control devices--Research
|
Additional Subjects |
Exhaust emissions ;
Organic compounds ;
Carbinols ;
Bubbling ;
Hydrocarbons ;
Measurement ;
Methanol ;
Flame ionization detector ;
Automobile exhaust
|
Internet Access |
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
ELCD |
EPA 600-3-87-035 |
|
NVFEL Library/Ann Arbor, MI |
11/07/2011 |
NTIS |
PB88-104344 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
iv, 11 p. : ill. ; 28 cm. |
Abstract |
The report evaluates a simplified technique for estimating methanol emission rates in auto exhaust. The technique, referred to as the FID Bubbled Method or FBM, is based in principle on the fact that while hydrocarbons are not readily absorbed in water, methanol is. Hence, by using a heated flame ionization detector to measure the organic mass in samples before and after bubbling them in water, the quantity of methanol originally present can be estimated by taking the difference between the measurements. Evaluation of the method was done by comparing methanol measurements using the FBM with measurements made using an established reference method. Results showed poor to fair agreement between the two methods. The FBM appeared better at estimating methanol emission rates from evaporative tests than from exhaust tests and also exhibited better accuracy for samples containing higher levels of methanol. |
Notes |
Includes bibliographical references (p. 7). "PB88-104344." "EPA/600/3-87/035"--T.p. "September 1987." |
Contents Notes |
This report evaluates a simplified technique for estimating methanol emission rates in auto exhaust. The technique, referred to as the FID Bubbled Method or FBM, is based in principle on the fact that while hydrocarbons are not readily absorbed in water, methanol is. Hence, by using a heated flame ionization detector to measure the organic mass in samples before and after bubbling them in water, the quantity of methanol originally present can be estimated by taking the difference between the measurements. Evaluation of the method was done by comparing methanol measurements using the FBM with measurements made using an established reference method. Results showed poor to fair agreement between the two methods. The FID Bubbled Method appeared better at estimating methanol emission rates from evaporative tests than from exhaust tests and also exhibited better accuracy for samples containing higher levels of methanol. |