Record Display for the EPA National Library Catalog


OLS Field Name OLS Field Data
Main Title Preliminary industry characterization : wood building products surface coating /
CORP Author Midwest Research Institute (Kansas City, Mo.)
Publisher U.S. Environmental Protection Agency, Coatings and Consumer Products Group, Emission Standards Division, Office of Air Quality Planning and Standards,
Year Published 1998
Report Number EPA-453/R-00-004
Stock Number PB2001-107532
OCLC Number 47904235
Additional Subjects Building products ; Wood ; Air pollution control ; Standards compliance ; Pollution regulations ; Clean Air Act ; Emissions ; Source categories ; Industry profiles ; Government agencies ; Development ; Surface coatings ; Maximum Achievable Control Technology(MACT) ; Coating processes ; National Emission Standards for Hazardous Air Pollutants(NESHAP)
Internet Access
Description Access URL
Library Call Number Additional Info Location Last
EHAD  EPA/453/R-00-004 Region 1 Library/Boston,MA 10/05/2001
EJBD ARCHIVE EPA 453/R-00-004 Headquarters Library/Washington,DC 12/17/2013
EKBD  EPA-453/R-00-004 Research Triangle Park Library/RTP, NC 09/07/2001
ERAD  EPA 453/R-00-004 Region 9 Library/San Francisco,CA 10/05/2001
ESAD  EPA 453-R-00-004 Region 10 Library/Seattle,WA 11/16/2001
NTIS  PB2001-107532 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. 01/01/1988
Collation 1 v. (various pagings) : ill. ; 28 cm.
Under Section 112(d) of the Clean Air Act (CAA), the U. S. Environmental Protection Agency (EPA) is developing national emission standards for hazardous air pollutants (NESHAP) for the wood building products surface coating source category. The EPA is required to publish final emission standards for the wood building products surface coating source category by November 15, 2000. For this source category, a national volatile organic compound (VOC) rule or control technique guidelines (CTG) may also be developed under Section 183(e) of the CAA. There is a possibility that case-by-case maximum achievable control technology (MACT) determinations will be required under Section 112 (g) for newly constructed and/or reconstructed major sources. The information summarized in this document is intended to provide preliminary information that can be used by States that may have to make case-by-case MACT determinations under Sections 112(g) or 112(j) of the CAA. Section 1 of this document gives an overview of the initial MACT development phase for this source category. Section 2 summarizes the issues raised and information gathering techniques used in this process. A preliminary characterization of the wood building products source category is given in Section 3. Section 3 also focuses on the source category's products, types of coatings used, application methods, emissions, and emission control techniques. Section 4 addresses recommendations for next steps in the MACT development process.
Midwest Research Institute. "September 1998." "EPA-453/R-00-004."