| Main Title |
Waste minimization assessment for a manufacturer of felt tip markers, stamp pads, and rubber cement / |
| Author |
Jendrucko, Richard J. ;
Thomas, T. M. ;
Looby, G. P.
|
| Other Authors |
|
| CORP Author |
Tennessee Univ., Knoxville. Dept. of Engineering Science and Mechanics. ;University City Science Center, Philadelphia, PA.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab. |
| Publisher |
U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, |
| Year Published |
1994 |
| Report Number |
EPA/600-S-94-013; EPA-R-814903; PB95111910 |
| Stock Number |
PB95-111910 |
| OCLC Number |
31534077 |
| Subjects |
Waste minimization--Research--Tennessee ;
Felt marker decoration--Research--Tennessee ;
Rubber stamp printing--Research--Tennessee ;
Adhesives--Research--Tennessee
|
| Additional Subjects |
Pollution control ;
Waste management ;
Pollution abatement ;
Waste treatment ;
Waste disposal ;
Industrial wastes ;
Hazardous materials ;
Waste streams ;
Waste water ;
Cost benefit analysis ;
Polyvinyl chloride ;
Polyethylene ;
Polystyrene ;
Polypropylene ;
Sludges ;
Solvents ;
Dyes ;
Injection molding ;
Waste minimization ;
Felt tip markers ;
Stamp pads ;
Rubber cement ;
Waste reduction ;
SIC 20-39
|
| Internet Access |
|
| Holdings |
| Library |
Call Number |
Additional Info |
Location |
Last
Modified |
Checkout
Status |
| EHAM |
EPA/600/S-94/013 |
|
Region 1 Library/Boston,MA |
05/25/2016 |
| EJBD |
EPA 600-S-94-013 |
c.1-2 |
Headquarters Library/Washington,DC |
09/20/2010 |
| ELBD ARCHIVE |
EPA 600-S-94-013 |
In Binder Received from HQ |
AWBERC Library/Cincinnati,OH |
10/04/2023 |
| ELBD |
EPA 600-S-94-013 |
|
AWBERC Library/Cincinnati,OH |
04/25/1998 |
| EMBD |
EPA/600/S-94/013 |
|
NRMRL/GWERD Library/Ada,OK |
12/28/2001 |
| NTIS |
PB95-111910 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
| Collation |
7 pages : illustrations ; 28 cm. |
| Abstract |
The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. The Waste Minimization Assessment Centers (WMACs) team at the University of Tennessee performed an assessment at a plant that manufactures felt tip markers, stamp pads, and rubber cement. The team's report, detailing findings and recommendations, indicated that a large quantity of scrap plastic is generated by the injection molding of markers and stamp pad cases, and that significant cost savings could be achieved by segregating scrap plastic and reusing it in subsequent production runs. |
| Notes |
"September 1994." "EPA/600-S-94-013." Shipping list no.: 1994-0354-P. |
