Model Clearinghouse Information Storage and Retrieval System
Record Details
Use of beta ARM2 Technique as an Alternative Model
Record No: 15-II-01 Last Update: 12/22/2015
EPA Region: | 2 | Fiscal Year: | 2015 | |
States: | NY | |||
Record Type: | Action | |||
Pollutants: | NO2 | Sources: | Generic to Any Stationary Source | |
Models: | AERMOD | Urban/Rural: | Rural | |
Terrain: | Both High & Low | Regulations: | PSD | |
Guideline: | Guideline | Database: | Both | |
Oral/Written: | Written | Involvement: | Review and Comment | |
Subjects: | Technical Credibility of Nonguideline Techniques | |||
Comments: | ||||
Issue: Region II is seeking concurrence from the Model Clearinghouse for the approval of an alternative modeling demonstration for the use of the beta Ambient Ratio Method 2 (ARM2) Tier 2 NO2 modeling technique. The ARM2 technique will be applied in an compliance demonstration for a PSD permit modification at the Corning Diesel Manufacturing Facility in Steuben County, NY. C/H Response: The Model Clearinghouse concurs that ARM2 is an appropriate technique for modeling NO2 impacts from the Corning Diesel Manufacturing Facility in Steuben Count, NY. In this PSD permit modification, the ARM2 technique can be used to address changes in stack parameters along with changes in operating conditions that can otherwise be difficult or impossible to account for in a standard AERMOD model run. This particular case requires substantial consideration when selecting the minimum ambient ratio to apply in ARM2. Based on the information provided to date, the Model Clearinghouse believes that a minimum ambient NO2/NOx ratio of 0.54 will be appropriately conservative. |
||||
Memoranda: | ||||
Memo: Model Clearinghouse Review of the Use of the Beta ARM2 Technique for the Corning Diesel Manufacturing Facility in Steuben County, New York Dated: July 16, 2015 From: George Bridgers, Model Clearinghouse Director Air Quality Modeling Group, EPA Chris Owen, Physical Scientist Air Quality Modeling Group, EPA To: Richard Ruvo, Chief Air Programs Branch, Region 2, EPA Annamaria Colecchia, Environmental Scientist Permitting Section, Air Programs Branch, Region 2, EPA Memo: Request to Approve the Use of the Beta ARM2 Technique for the Corning Diesel Manufacturing Facility in Steuben County, New York Dated: June 18, 2015 From: Annamaria Colecchia, Environmental Scientist Permitting Section, Air Programs Branch, Region 2, EPA Thru: Richard Ruvo, Chief Air Programs Branch, Region 2, EPA To: George Bridgers, Model Clearinghouse Director Air Quality Modeling Group, EPA Attachment A: Corning Diesel Mfg Final Modeling Report - May 2015 |