Grantee Research Project Results
Publications Details for Grant Number R825370C057
Environmentally Conscious Manufacturing: Prediction of Processing Waste Streams for Discrete Products
Other Views
- All
Publications - Selected
Publication Types - Journal
Articles - Publications Submitted
After Final Report - Redisplay this page with
Reference Title, Journal, and Author Columns - Display this Page
in RIS Format
| Reference Type | Citation | Progress Report Year | Document Sources |
|---|---|---|---|
| Book Chapter | Billatos SB, Zhang HC. Concurrent Product Design and Environmentally Conscious Manufacturing. American Society of Mechanical Engineers, New York, NY. 1997: |
R825370C057 (1998) |
not available |
| Book Chapter | Cao, T., S.A. Batzer, and J.W. Sutherland, "Experimental Investigations of Tapped Thread Surface Roughness for Cast Aluminum Alloys." Manufacturing Science and Engineering, ASME Bound Volume - MED Vol. 6-1, pp. 189-195, November, 1997. |
R825370C057 (1998) |
not available |
| Book Chapter | Sutherland, J.W., C.M. Daniel, S. Vadrevu, and W.W. Olson, "Evaluating Reuse and Remanufacturing Potential Using a Simple Model for Product Value." In: Billatos SB, Zhang HC, eds. Concurrent Product Design and Environmentally Conscious Manufacturing, ASME Bound Volume - DE Vol. 89 / MED Vol. 5, pp. 263-274, November, 1997, NY. |
R825370C057 (1998) |
not available |
| Dissertation/Thesis | Batzer, S., "An Analytical and Experimental Investigation into Chip Morphology in Orthogonal Machining." Ph.D. Thesis, Michigan Technological University, April, 1998. |
R825370C057 (1998) |
not available |
| Dissertation/Thesis | Bergstrom, A.W., "Reducing the Environmental Impact of the Drilling Process." Master of Science Thesis, Michigan Technological University, November, 1997. |
R825370C057 (1998) |
not available |
| Dissertation/Thesis | Cao, T., "Modeling of the Thread Tapping Process: Chip Formation and Cutting Fluid Lubrication." Ph.D. Thesis, Michigan Technological University, August, 1998. |
R825370C057 (1998) |
not available |
| Dissertation/Thesis | Filipovic, A., "Cutting Fluid System Dynamics: Modeling and Control." Master of Science Thesis, Michigan Technological University, August, 1998. |
R825345 (Final) R825370C057 (1998) |
not available |
| Dissertation/Thesis | Soni N. Application of goal programming to reduce environmental impact of machining processes. Masters of Science Thesis, Michigan Technological University, 1997. |
R825345 (Final) R825370C057 (1998) |
not available |
| Dissertation/Thesis | Zheng, Y., "A Continuum Mechanics Model for Orthogonal Cutting." Ph.D. Thesis, Michigan Technological University, April, 1998. |
R825370C057 (1998) |
not available |
| Journal Article | Batzer, S.A., D.M. Haan, P.D. Rao, W.W. Olson, and J.W. Sutherland, "Chip morphology and hole surface texture in the drilling of cast aluminum alloys." Journal of Materials Processing Technology, Vol. 79(1-3), pp. 72-78, July, 1998. |
R825370C057 (1998) |
not available |
| Journal Article | Batzer, S.A. and J.W. Sutherland, "The dry cure for coolant ills." Cutting Tool Engineering 1998;50(4):34-44. |
R825370C057 (1998) |
not available |
| Journal Article | Gunter KL, Sutherland JW. "An experimental investigation into the Effect of Process Conditions on the Mass Concentration of Cutting Fluid Mist in Turning." Journal of Cleaner Production 1999;7(5):341-350. |
R825370C057 (1998) |
not available |
| Journal Article | Haan, D.M., S.A. Batzer, W.W. Olson, and J.W. Sutherland, "An Experimental study of cutting fluid effects in drilling." Journal of Materials Processing Technology, Vol. 71(2), pp. 305-313, November, 1997. |
R825370C057 (1998) |
not available |
| Meeting | Sutherland, J.W., J.R. Baker, and P.P. Radecki, Environmentally Conscious Manufacturing at the National Center for Clean Industrial and Treatment Technologies, Michigan Technological University Manufacturing Initiative Blue Ribbon Committee Meeting, Houghton, MI, August, 1998. |
R825370C057 (1998) |
not available |
| Proceedings | Batzer, S.A., T. Cao, and J.W. Sutherland, "Effects of Cutting Fluid Composition on the Dimensional Accuracy of Tapped Threads." submitted to NAMRC XXVII, 1998. |
R825370C057 (1998) |
not available |
| Proceedings | Olson, W.W., S.M. Pandit, J.W. Sutherland, and H. Xue, "Life Cycle Analysis Using Input-Output Analysis with Markov Decision Processes." Proceedings of the 1998 NSF Design & Manufacturing Grantees Conference, pp. 9-10, 1998. |
R825370C057 (1998) |
not available |
| Proceedings | Olson, W.W., J.B. Wang, J. Zeng, and J.W. Sutherland, "Reducing Manufacturing Impacts on the Environment with Markov Decision Making." Proceedings of the Japan - U.S.A. Symposium on Flexible Automation, pp. 191-198, July, 1998. |
R825345 (Final) R825370C057 (1998) |
not available |
| Proceedings | Sheng, P., D. Bauer, J.W. Sutherland, T. Cao, A. Gandhi, R.E. DeVor, and S. Skerlos, "Web-Based Cutting Fluid Evaluation Software." Proceedings of CIRP International Seminar on Manufacturing Systems, Berkeley, CA, May, 1998. |
R825370C057 (1998) |
not available |
| Proceedings | Sutherland, J.W., Y. Yue, Y. Zheng, K. Gunter, and T. Cao, "Evaluation of Environmental Effects and Process Impact of Cutting Fluids." Proceedings of the 1998 NSF Design & Manufacturing Grantees Conference, pp. 369-370, 1998. |
R825370C057 (1998) |
not available |
| Proceedings | Sutherland, J.W., S. Basu, and A. Gandhi, "Pollution Prevention in Machining." Proceedings of 1998 National Pollution Prevention Roundtable Conference, Cincinnati, OH, April, 1998a. |
R825370C057 (1998) |
not available |
| Proceedings | Yue, Y., Y. Zheng, S. Basu, and J.W. Sutherland, "Cutting Fluids: Performance Measures and Health Related Characteristics." Proceedings of the Japan - U.S.A. Symposium on Flexible Automation, pp. 199-208, July, 1998. |
R825370C057 (1998) |
not available |
The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Conclusions drawn by the principal investigators have not been reviewed by the Agency.