Grantee Research Project Results

Final Report: Regeneration and Reactivation of Carbon Adsorbents by Radio Frequency Induction Heating

EPA Grant Number: R826694C679
Subproject: this is subproject number 679 , established and managed by the Center Director under grant R828598
(EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
Center: UT Center for Infrastructure Modeling and Management
Center Director: Hodges, Ben R.
Title: Regeneration and Reactivation of Carbon Adsorbents by Radio Frequency Induction Heating
Investigators: Pearce, John A.
Institution: The University of Texas at Austin
EPA Project Officer: Aja, Hayley
Project Period: September 1, 2000 through August 31, 2004
RFA: Gulf Coast Hazardous Substance Research Center (Lamar University) (1996) RFA Text |  Recipients Lists
Research Category: Hazardous Waste/Remediation , Targeted Research

Objective:

1. Measure electrical properties of adsorbents, 2. Develop and calibrate improved measurement devices, 3. Design coils for more uniform RF heating, 4. Complete small scale experimental studies on dry and saturated adsorbents, 5. Complete numerical model analytical studies, 6. Perform larger scale (ca. 8 kW) experiments.

Summary/Accomplishments (Outputs/Outcomes):

1. Electrical Properties of Adsorbents: We measured the electric permittivity of four commercially available carbon adsorbents (supplied by Wesvaco Inc) over the radio frequency range (1 to 40 MHz). Westvaco is by far the largest volume supplier of activated carbon adsorbents, and the four types had quite different electrical properties: BX-7540 and CX-HC40 are semiconductors and WV-B and BAX-1500 are lossy dielectrics. Semiconductors are best heated with induction applicators, as was described in the project proposal. Lossy dielectrics are best heated by electric field applicators. Consequently, the project plan was modified to include experiments and numerical model studies of both types. 2. Develop and Calibrate Improved Measurement Devices: We designed, constructed and calibrated a capacitive differential voltage divider to measure the voltage applied to both E-field capacitive plate electrodes and induction coils. The inductance of the coils was measured prior to experiments (loaded and unloaded) and used to calculate inductor current. Other instrumentation included fiber optic temperature sensors, purge gas flow meters and a sensitive mass balance to determine water loss rates. 3. Design Coils for More Uniform RF Heating: Induction coil designs were evaluated by numerical models using a commercial High Frequency Finite Element Modeling program (Ansoft, Inc.). The effect of operating RF frequency and coil dimensions on the heating pattern was determined over the ISM frequencies: 6.78, 13.56 and 27.12 MHz. Each model required approximately 20 hours to solve on a Dell Precision 420 Pentium III computer. 4. Small Scale Experimental Studies: Experiments were conducted at 27.12 MHz for powers between 150 and 300 W between capacitive plates and in RF induction coils. Transient temperatures and carbon mass measurements were collected for comparison to model studies. Applied power was estimated for measurements of applicator voltage. The experiments showed an interesting phenomenon, apparently unique to RF heating: at low coverage, the rate of water elimination from the carbon depended on RF power density alone, not on local temperature. This surprising observation suggests that it might be possible to use low level RF heating to prevent water from collecting in pores while allowing non-polar VOCs to deposit, thus extending the useful life and/or the cycle time of the adsorbent. 5. Numerical Model Analytical Studies: Two numerical models were constructed to predict transient temperatures and water loss during RF regeneration: one for the capacitive plate E-field applicator and the other for the induction coils. The electric field in the capacitive plate applicator is nearly uniform and relatively simple to estimate. The electric field induced by the induction coil is very difficult to calculate, and the FEM model program was used to estimate the RF heating field. Anempirical fit was used to include a direct RF water ejection process, as suggested by the experiments (see 4. above). The numerical model results compare well with the experimental results in both applicators. 6. Perform Larger Scale Experiments:This objective could not be achieved in the time and with the resources available. The original project plan was substantially altered to accommodate suggestions from the SAC and to include E-field heating as well as the original induction heating investigation. The inclusion of E-field heating was made necessary by the electrical property measurement results (see 1. above).

Journal Articles:

No journal articles submitted with this report: View all 4 publications for this subproject

Supplemental Keywords:

RFA, Air, Scientific Discipline, INTERNATIONAL COOPERATION, Waste, Hazardous, Remediation, Chemical Engineering, Environmental Chemistry, Engineering, Chemistry, & Physics, Analytical Chemistry, Hazardous Waste, Atmospheric Sciences, Environmental Engineering, adsorption, hazadous waste streams, carbon adsorption stream, carbon adsobents, radio frequency induction, electromagnetic heating, hazardous waste treatment, adsorbents, air emissions, adsorption process, electrochemical technology, organic solvent vapors, emission control technologies, carbon aerosols, emissions contol engineering, electrochemistry, advanced treatment technologies, carbon adsorption, electrochemical methods

Progress and Final Reports:

Original Abstract

2001

2002

2003

Main Center Abstract and Reports:

R828598    UT Center for Infrastructure Modeling and Management

Subprojects under this Center: (EPA does not fund or establish subprojects; EPA awards and manages the overall grant for this center).
R822721C529 Environmentally Acceptable Endpoints: Risk Based Remediation Using Bioremediation
R822721C552 Degradative Solidification/Stabilization Technology for Chlorinated Hydrocarbons
R822721C569 Treatment and Product Recovery: Supercritical Water Oxidation of Nylon Monomer Manufacturing Waste
R822721C620 Colloidal Fouling of Membranes: Implications in the Treatment of Textile Dye Wastes and Water Reuse
R822721C626 Catalytic Hydroprocessing of Chlorinated Organics
R822721C627 The Interaction of Microbial Activity and Zero Valent Iron Permeable Barrier Technology
R822721C630 Microbial Cometabolism of Recalcitrant Chemicals in Contaminated Air Streams
R822721C633 Catalyst Lifetime Studies for Chlorocarbon Steam Reforming
R822721C635 Electrokinetic/Surfactant-Enhanced Remediation of Hydrophobic Pollutants in Low Permeability Subsurface Environments
R822721C636 Transformation Reactions of Nitroaromatic and Nitrogen Heterocyclic Compounds on Granular Activated Carbon (GAC) Surfaces: Enhancement of GAC Adsorption in Natural and Engineered Environmental Systems
R822721C640 Environmentally Friendly Organic Synthesis in Supercritical Fluids
R822721C645 Development and Evaluation of an Integrated Model to Facilitate Risk-Based Corrective Action at Superfund Sites
R822721C651 Adjustable Biopolymer Chelators for Cadmium, Lead and Mercury
R822721C653 New Electrochemically Smart Catalysts for Hazardous Waste Management and Development of Capillary Electrophoresis for Analysis of their Products
R822721C655 Soil Sampling in South Alabama Oil Fields
R822721C659 Subsurface Contamination Site Characterization via a Computer-Aided Visual Tool
R822721C661 New Insoluble supports for Protein Immobilization for Use in Metalloprotein Affinity Metal Chromatography
R822721C663 Soil Remediation with Ultra-High-Efficiency Hydrocyclones
R822721C669 Solid Acid Catalyzed Alkylation in Supercritical Fluids
R822721C679 Regeneration/Reactivation of Carbon Adsorbents by Radio Frequency (RF) Induction Heating
R822721C687 Improved Halogen Resistance of Catalytic Oxidation
R822721C696 Phytoremediation and Bioremediation of Land Contaminated By PAHs, PCBs, and TNT
R822721C697 Fundamental and Kinetic Investigation of Sorbent Technology for Optimum Mercury Emission Control
R822721C700 Effects of Natural and Cyclic Variations on Contaminant Fate and Transport
R822721C703 Enhancement of DNAPL Dissolution Rates by Dechlorinating Anaerobes
R826694C620 Colloidal Fouling of Membranes: Implications in the Treatment of Textile Dye Wastes and Water Reuse
R826694C625 Enhanced Treatment of DNAPLs Contaminated Soils and Groundwater Using Biosurfactants: In-Situ Bioremediation
R826694C626 Catalytic Hydroprocessing of Chlorinated Wastes
R826694C627 The Interaction of Microbial Activity and Zero Valent Iron Permeable Barrier Technology
R826694C629 Biofiltration of BTEX in Petroleum-Contaminated Soil Remediation Off-Gas
R826694C630 Microbial Cometabolism of Recalcitrant Chemicals in Contaminated Air Streams
R826694C633 Catalyst Lifetime Studies for Chlorocarbon Steam Reforming
R826694C635 Electrokinetic/Surfactant-Enhanced Remediation of Hydrophobic Pollutants in Low Permeability Subsurface Environments
R826694C636 Transformation Reactions of Nitroaromatic and Nitrogen Heterocyclic Compounds on Granular Activated Carbon (GAC) Surfaces: Enhancement of GAC Adsorption in Natural and Engineered Environmental Systems
R826694C640 Environmentally Friendly Organic Synthesis in Supercritical Fluids
R826694C645 Development and Evaluation of an Integrated Model to Facilitate Risk-Based Corrective Action at Superfund Sites
R826694C651 Adjustable Biopolymer Chelators for Cadmium, Lead, and Mercury Remeidation
R826694C659 Subsurface Contamination Site characterization Via a Computer-Aided Visual Tool
R826694C661 New Insoluble supports for Protein Immobilization for Use in Metalloprotein Affinity Metal Chromatography
R826694C669 Solid Acid Catalyzed Alkylation in Supercritical Reaction Media
R826694C679 Regeneration and Reactivation of Carbon Adsorbents by Radio Frequency Induction Heating
R826694C696 Phytoremediation and Bioremediation of Land Contaminated By PAHs, PCBs, and TNT
R826694C697 Fundamental and Kinetic Investigation of Sorbent Technology for Optimum Mercury Emission Control
R826694C700 Effects of Natural Cyclic Variations on Contaminated Fate and Transport
R826694C703 Enhancement of DNAPL Dissolution Rates by Dechlorinating Anaerobes
R826694C705 A Pilot Plant for Producing Mixed Ketones from Waste Biomass
R826694C722 The Effects of an Oily-Phase on VOC Emissions from Industrial Wastewater
R826694C724 Mercury Removal from Stack Gas by Aqueous Scrubbing
R826694C725 Transport, Fate and Risk Implications of Environmentally Acceptable Endpoint Decisions
R826694C731 Development and Application of a Real-Time Optical Sensor for Atmospheric Formaldehyde
R826694C734 An Advanced System for Pollution Prevention in Chemical Complexes
R828598C001 Field Study Abstract: A Model of Ambient Air Pollution in Southeast Texas Using Artificial Neural Network Technology
R828598C002 Hollow Fiber Membrane Bioreactors for Treating Water and Air Streams Contaminated with Chlorinated Solvents
R828598C003 Fugitive Emissions of Hazardous Air Pollutants from On-Site Industrial Sewers
R828598C004 Biofiltration Technology Development
R828598C005 A Risk-Based Decision Analysis Approach for Aquifers Contaminated with DNAPLs
R828598C006 In-Situ Remediation for Contaminated Soils Using Prefabricated Vertical Drains
R828598C007 Membrane Technology Selection System for the Metal Finishing Industry
R828598C008 Sequential Environments for Enhanced Bioremediation of Chlorinated Aliphatic Hydrocarbons
R828598C009 Waste Minimization in the Magnetic Tape Industry: Waterborne Coating Formulations for Magnetic Tape Manufacture
R828598C010 Soil Remediation by Agglomeration with Petroleum Coke
R828598C011 Recovery of Dilute Phosphoric Acid in Waste Streams Using Waste Gas Ammonia: The Regenerative MAP/DAP Process
R828598C012 Stochastic Risk Assessment for Bioremediation
R828598C013 Selective Removal of Heavy Metals from Wastewater by Chelation in Supercritical Fluids
R828598C014 Optimization of Treatment Technologies for Detoxification of PCB Contaminated Soils
R828598C015 Wastewater Remediation by Catalytic Wet Oxidation
R828598C016 Permanence of Metals Containment in Solidified and Stabilized Wastes
R828598C017 Combustion Enhancement by Radial Jet Reattachment - Low Generation of Hazardous Gases and High Thermal Efficiency
R828598C018 A Process To Convert Industrial Biosludge and Paper Fines to Mixed Alcohol Fuels
R828598C019 Homogeneous Catalysis in Supercritical Carbon Dioxide
R828598C020 Ultrasonic Enhancement of the Removal of Heavy Metals
R828598C021 The Binding Chemistry and Leaching Mechanisms of Advanced Solidification/Stabilization Systems for Hazardous Waste Management
R828598C022 Development of an Air-Stripping and UV/H2O2 Oxidation Integrated Process To Treat a Chloro-Hydrocarbon-Contaminated Ground Water
R828598C023 A Comparative Study of Siting Opposition in Two Counties
R828598C024 Sonochemical Treatment of Hazardous Organic Compounds II: Process Optimization and Pathway Studies
R828598C025 Laser Diagnostics of the Combustion Process within a Rotary Kiln Incinerator
R828598C026 Use of Inorganic Ion Exchangers for Hazardous Waste Remediation
R828598C027 Kaolinite Sorbent for the Removal of Heavy Metals from Incinerated Lubricating Oils
R828598C028 Destruction of Chlorinated Hydrocarbons in Process Streams Using Catalytic Steam Reforming
R828598C029 Integrated Process Treatment Train (Bioremediation {Aerobic/Anaerobic} and Immobilization) for Texas Soils Contaminated with Combined Hazardous Wastes
R828598C030 Photo-Oxidation by H2O2/VisUV of Off-Gas Atmospheric Emissions from Industrial and Environmental Remediation Sources
R828598C031 Concentrated Halide Extraction and Recovery of Lead from Soil
R828598C032 Biodegradable Surfactant for Underground Chlorinated Solvent Remediation
R828598C033 A Software Guidance System for Choosing Analytical Subsurface Fate and Transport Models Including a Library of Computer Solutions for the Analytical Models
R828598C034 Hydrodynamic Modeling of Leachate Recirculating Landfill
R828598C035 Measurement of Oxygen Transfer Rate in Soil Matrices
R828598C036 Sorbent Technology for Multipollutant Control During Fluidized Bed Incineration
R828598C037 Pollution Prevention by Process Modification Using On-Line Optimization
R828598C038 Pollution Prevention by Process Modification
R828598C039 Water Solubility and Henry's Law Constant
R828598C040 Transferring Technical Information on Hazardous Substance Research by Publishing on the World Wide Web
R828598C041 Stress Protein Responses to Multiple Metal Exposure in Grass Shrimp
R828598C042 Life-Cycle Environmental Costing for Managing Pollution Prevention in the Chemical and Petroleum Refining Industries: A Cross-Border Approach
R828598C687 Improved Halogen Resistance of Catalytic Oxidation Through Efficient Catalyst Testing
R828598C696 Phytoremediation and Bioremediation of Land Contaminated By PAHs, PCBs, and TNT
R828598C697 Fundamental and Kinetic Investigation of Sorbent Technology for Optimum Mercury Emission Control
R828598C700 Effects of Natural Cyclic Variations on Contaminated Fate and Transport
R828598C703 Enhancement of DNAPL Dissolution Rates by Dechlorinating Anaerobes
R828598C705 A Pilot Plant for Producing Mixed Ketones from Waste Biomass
R828598C722 The Effects of an Oily-Phase on VOC Emissions from Industrial Wastewater
R828598C724 Mercury Removal from Stack Gas by Aqueous Scrubbing
R828598C725 Transport, Fate and Risk Implications of Environmentally Acceptable Endpoint Decisions
R828598C731 Development and Application of a Real Time Optical Sensor for Atmospheric Formaldehyde
R828598C734 An Advanced System for Pollution Prevention in Chemical Complexes
R828598C743 Field Demonstration of Ultrasound Enhancement of Permeable Treatment Walls
R828598C744 Optical Fibers Coated With Titania Membrane/UV-Generating Crystal in a Distributed-Light Photoreactor for VOC Oxidation
R828598C749 Characterization and Modeling of Indoor Particulate Contaminants In a Heavily Industrialized Community
R828598C753 Adsolubilization and Photocatalysis in a Semiconducting Monolithic Reactor for Wastewater Treatment
R828598C754 Remote Detection of Gas Emissions in Industrial Processes
R828598C759 Searching for Optimum Composition of Phosphogypsum: Fly ash: Cement Composites for Oyster Culch Materials
R828598C761 Development of a Phytologically-Based Biosorptive Water Treatment Process
R828598C766 Chlorinated Solvent Impact and Remediation Strategies for the Dry Cleaning Industry
R828598C769 Soil/Sediment Remediation by Hot Water Extraction Combined with In-Situ Wet Oxidation
R828598C771 Fluoracrylate Polymer Supported Ligands as Catalysts for Environmentally Benign Synthesis in Supercritical Fluids
R828598C774 The Feasibility of Electrophoretic Repair of Impoundment Leaks
R828598C777 Surfactant Enhanced Photo-oxidation of Wastewaters
R828598C778 Stationary Power Generation Via Solid Oxide Fuel Cells: A Response to Pollution and Global Warming
R828598C786 Photocatalytic Recovery of Sulfur and Hydrogen From Hydrogen Sulfide
R828598C787 Biosurfactant Produced from Used Vegetable Oil for removal of Metals From Wastewaters and Soils
R828598C789 Genetic Engineering of Enzymatic Cyanide Clearance
R828598C791 Characterizing the Intrinsic Remediation of MTBE at Field Sites
R828598C799 Simultaneous Water Conservation/Recycling/Reuse and Waste Reduction in Semiconductor Manufacturing
R828598C801 Building Defined Mixed Cultures To Biodegrade Diverse Mixtures Of Chlorinated Solvents
R828598C802 Engineering of Nanocrystal Based Catalytic Materials for Hydroprocessing of Halogenated Organics
R828598C807 Commercial Demonstration of Hydrogen Peroxide Injection to Control NOx Emissions from Combustion Sources
R828598C809 Evaluating Source Grouting and ORC for Remediating MTBE Sites
R828598C810 Application of Total Cost Assessment To Process Design In the Chemical Industry
R828598C846 Quantitative Demonstration of Source-Zone Bioremediation in A Field-Scale Experimental Controlled Release System