Publications for Center:

EERC - National Center for Clean Industrial and Treatment Technologies (CenCITT)

Grant Number R825370

Book (2)
Book Chapter (6)
Dissertation/Thesis (18)
Journal Article (36)
Meeting (37)
Paper (1)
Presentation (31)
Proceedings (19)
Report (1)
Symposium (3)
Working Group/Panel (1)
Reference Type Citation Progress Report Year Document Sources
Book Adler S, Beaver E, Bryan P, Rogers JEL, Robinson S, Russomanno C. Vision 2020: 1998 Separations Roadmap. American Institute of Chemical Engineers, New York, NY. 1998: R825370 (1998)
not available
Book Radecki PP, Crittenden JC, Shonnard DL, Bulloch JL. Emerging Separation and Separative Reaction Technologies for Process Waste Reduction: Adsorption and Membrane Systems. American Institute of Chemical Engineers, New York, NY. 1998:4565-4570 R825370 (1998)
R825370 (1999)
not available
Book Chapter Billatos SB, Zhang HC. Concurrent Product Design and Environmentally Conscious Manufacturing. American Society of Mechanical Engineers, New York, NY. 1997: R825370C057 (1998)
not available
Book Chapter Cao, T., S.A. Batzer, and J.W. Sutherland, "Experimental Investigations of Tapped Thread Surface Roughness for Cast Aluminum Alloys." Manufacturing Science and Engineering, ASME Bound Volume - MED Vol. 6-1, pp. 189-195, November, 1997. R825370C057 (1998)
not available
Book Chapter Dechapanya W, Rogers TN, Baker JR, Radecki PP, Sikdar SK, Diwekar U. Application of the analytic hierarchy process for integrating environmental considerations into process design decisions. Kluwer Academic Publishers, Dordecht, The Netherlands. 1999:367 R825370C064 (1999)
not available
Book Chapter Hand DW, Hokanson DR, Crittenden JC. Air stripping and aeration. In: Water Quality & Treatment: A Handbook of Community Water Supplies, 5th Edition, American Water Works Association. New York, NY: McGraw-Hill, 1999, Chapter 5, pp. 5.1-5.68. R825370 (1999)
R825370C076 (1999)
Book Chapter Sutherland, J.W., C.M. Daniel, S. Vadrevu, and W.W. Olson, "Evaluating Reuse and Remanufacturing Potential Using a Simple Model for Product Value." In: Billatos SB, Zhang HC, eds. Concurrent Product Design and Environmentally Conscious Manufacturing, ASME Bound Volume - DE Vol. 89 / MED Vol. 5, pp. 263-274, November, 1997, NY. R825370C057 (1998)
not available
Book Chapter Sutherland, J.W., K.L. Gunter, Y. Yue, A. Gandhi, and Y.K. Siow, "The Role of Cutting Fluids in Machining: Modeling Mist Formation and Heat Transfer Effects." to appear in 1999 NSF Design and Manufacturing Grantees Conference, 1999. R825370 (1998)
not available
Dissertation/Thesis Atkins, M.S. "Process Diagnostics: A New Strategy for Process Evaluation and Improvement." Master of Science Thesis, Michigan Technological University, July 1999. R825370C065 (1999)
R825370C077 (1999)
not available
Dissertation/Thesis Batzer, S., "An Analytical and Experimental Investigation into Chip Morphology in Orthogonal Machining." Ph.D. Thesis, Michigan Technological University, April, 1998. R825370C057 (1998)
not available
Dissertation/Thesis Bergstrom, A.W., "Reducing the Environmental Impact of the Drilling Process." Master of Science Thesis, Michigan Technological University, November, 1997. R825370C057 (1998)
not available
Dissertation/Thesis Bjorklund, M.C., "Methane Conversion in the Simulated Countercurrent Moving Bed Chromatographic Reactor." Ph.D. Thesis, University of Minnesota, December, 1999. R825370C048 (1999)
not available
Dissertation/Thesis Cao, T., "Modeling of the Thread Tapping Process: Chip Formation and Cutting Fluid Lubrication." Ph.D. Thesis, Michigan Technological University, August, 1998. R825370C057 (1998)
not available
Dissertation/Thesis Dechapanya, W., "Modifying Analytical Hierarchy Processing (AHP) for Multi-Criteria Process Analysis of Economic and Environmental Performance Measures." Master of Science Thesis, Michigan Technological University, July, 1998. R825370C065 (1998)
not available
Dissertation/Thesis Dechapanya, W., "Photocatalytic Conversion of Methane to Methanol." Master of Science Thesis, Michigan Technological University, June, 1999. R825370C073 (1999)
not available
Dissertation/Thesis Dillon, C.D., "In-Line Copper Recovery Technology." Master of Science Thesis, University of Minnesota, 1999. R825370C069 (1999)
not available
Dissertation/Thesis Figueroa RJ. Data integration and evaluation of assembly/disassembly via software plugins to CAD Systems. M.S. Thesis, University of Wisconsin-Madison, Madison, WI, 1999. R825370 (1999)
R825370C067 (1999)
Dissertation/Thesis Figueroa, A., "Modeling of Steam Generating Equipment and Development of the Boiler and Combustion Analysis Tool." Master of Science Thesis, Michigan Technological University, May, 1998. R825370C065 (1998)
not available
Dissertation/Thesis Filipovic, A., "Cutting Fluid System Dynamics: Modeling and Control." Master of Science Thesis, Michigan Technological University, August, 1998. R825345 (Final)
R825370C057 (1998)
not available
Dissertation/Thesis Hiew, D.S., "Development of the Environmental Fate and Risk Assessment Tool (EFRAT) and Application to Solvent Recovery from a Gaseous Waste Stream." Master of Science Thesis, Michigan Technological University, August, 1998. R825370C065 (1998)
not available
Dissertation/Thesis Huff, B., "A Model for Ultrafiltration Performance Prediction." Master of Science Thesis, University of Minnesota, 1999. R825370C054 (1999)
not available
Dissertation/Thesis Lee K. Destructive design for disassembly. M.S. Thesis. Department of Mechanical Engineering, University of Wisconsin-Madison, Madison, WI, 1999. R825370 (1999)
R825370C067 (1999)
Dissertation/Thesis Sangwichien, C., "Modeling and Evaluating Solvent Recovery Technologies Applied to Industrial Pollution Prevention." Master of Science Thesis, Michigan Technological University, July, 1998. R825370C065 (1998)
not available
Dissertation/Thesis Shaomin, Y., "Design Tools for Chemical Process Safety: Accident Probability." Master of Science Thesis, Michigan Technological University, expected December, 1998. R825370C066 (1998)
not available
Dissertation/Thesis Soni N. Application of goal programming to reduce environmental impact of machining processes. Masters of Science Thesis, Michigan Technological University, 1997. R825345 (Final)
R825370C057 (1998)
not available
Dissertation/Thesis Zheng, Y., "A Continuum Mechanics Model for Orthogonal Cutting." Ph.D. Thesis, Michigan Technological University, April, 1998. R825370C057 (1998)
not available
Journal Article Batzer, S.A., D.M. Haan, P.D. Rao, W.W. Olson, and J.W. Sutherland, "Chip morphology and hole surface texture in the drilling of cast aluminum alloys." Journal of Materials Processing Technology, Vol. 79(1-3), pp. 72-78, July, 1998. R825370C057 (1998)
not available
Journal Article Batzer, S.A. and J.W. Sutherland, "The dry cure for coolant ills." Cutting Tool Engineering 1998;50(4):34-44. R825370C057 (1998)
not available
Journal Article Betts KS. Preventing pollution by design. Environmental Science & Technology A-Pages 1998;32(13):318A-320A. R825370C046 (1998)
Journal Article Burns RA, Crittenden JC, Hand DW, Selzer VH, Sutter LL, Salman SR. Effect of inorganic ions in heterogeneous photocatalysis of TCE. Journal of Environmental Engineering-Asce 1999;125(1):77-85 R825370 (1998)
R825370 (1999)
not available
Journal Article Cortright RD, Dumesic JA, Madon RJ, Catalytic cycles for hydrocarbon cracking on zeolites. Topics in Catalysis 1997;4(1-2):15-26. R825370 (1999)
R825370C056 (1998)
Journal Article Cortright RD, Levin PE, Dumesic JA. Kinetic studies of isobutane dehydrogenation and isobutene hydrogenation over Pt/Sn-based catalysts. Industrial & Engineering Chemistry Research 1998;37(5):1717-1723. R825370 (1999)
R825370C056 (1998)
Journal Article Crittenden JC, Hu SM, Hand DW, Green SA. A kinetic model for H2O2/UV process in a completely mixed batch reactor. Water Research 1999;33(10):2315-2328. R825370 (1999)
R825370C076 (1999)
Journal Article Crittenden JC, Sanongraj S, Bulloch JL, Hand DW, Rogers TN, Speth TF, Ulmer M. Correlation of aqueous-phase adsorption isotherms. Environmental Science & Technology 1999;33(17):2926-2933. R825370 (1999)
R825370C076 (1999)
Journal Article Gunter KL, Sutherland JW. "An experimental investigation into the Effect of Process Conditions on the Mass Concentration of Cutting Fluid Mist in Turning." Journal of Cleaner Production 1999;7(5):341-350. R825370C057 (1998)
not available
Journal Article Haan, D.M., S.A. Batzer, W.W. Olson, and J.W. Sutherland, "An Experimental study of cutting fluid effects in drilling." Journal of Materials Processing Technology, Vol. 71(2), pp. 305-313, November, 1997. R825370C057 (1998)
not available
Journal Article Hand DW, Ali AN, Bulloch JL, DeBraske ML, Crittenden JC, Hokanson DR. Adsorption equilibrium modeling of space station wastewaters. Journal of Environmental Engineering 1999;125(6):540-547. R825370 (1998)
R825370 (1999)
R825370C076 (1999)
Journal Article Hokanson, D.R., T.N. Rogers, D.W. Hand, J.C. Crittenden, and J.N. Fass, "Physical Properties for Water and Air Treatment: Combining Critically Evaluated Data with Quantitative Structure Activity Relationships." submitted to Water Research, February, 1999. R825370 (1999)
not available
Journal Article Kline, A.A., C.R. Szydlik, T.N. Rogers, and M.E. Mullins. An overview of compiling, critically evaluating, and delivering reliable physical property data from AIChE DIPPRĀ® Projects 911 and 912. Fluid Phase Equilibria, Vol. 150, pp. 421-428, 1998. R825370C064 (1999)
not available
Journal Article Lee K, Gadh R. Destructive disassembly to support virtual prototyping. IIE Transactions 1998;30(10):959-972. R825370 (1999)
R825370C067 (1999)
Journal Article Luehrs, D.C., J.P. Hickey, K.A. Godbole, and T.N. Rogers, "Estimation of Octanol/Water Partition Coefficients Using LSER Parameters." Advances in Environmental Research, Vol. 2 (2), pp. 181-185, 1998. R825370C064 (1998)
not available
Journal Article Mullins M, Rogers T, Loll A. Estimation of Henry's constants for aqueous systems at elevated temperatures. Fluid Phase Equilibria, Vol. 150, pp. 245-253, May, 1998. R825370C064 (1998)
not available
Journal Article Natal-Santiago MA, Hill JM, Dumesic JA. Studies of the adsorption of acetaldehyde, methyl acetate, ethyl acetate, and methyl trifluoroacetate on silica. Journal of Molecular Catalysis A-Chemical 1999;140(2):199-214. R825370 (1999)
R825370C056 (1998)
Journal Article Natal-Santiago MA, Alcala R, Dumesic JA. DFT study of the isomerization of hexyl species involved in the acid-catalyzed conversion of 2-methyl-pentene-2. Journal of Catalysis 1999;181(1):124-144. R825370 (1999)
R825370C056 (1998)
Journal Article Natal-Santiago MA, Dumesic JA. Microcalorimetric, FTIR, and DFT studies of the adsorption of methanol, ethanol, and 2,2,2-trifluoroethanol on silica. Journal of Catalysis 1998;175(2):252-268. R825370 (1999)
R825370C056 (1998)
Journal Article Raymond, J.W., T.N. Rogers, D.R. Shonnard, and A.A. Kline, "A Review of Structure-Based Biodegradation Estimation Methods." accepted for publication, Journal of Hazardous Materials, 1999. R825370C064 (1999)
R825370C077 (1999)
not available
Journal Article Raymond, J.W. and T.N. Rogers, "Molecular Structure Disassembly Program (MOSDAP): A Chemical Information Model to Automate Structure-Based Physical Property Estimation." Journal of Chemical Information and Computer Sciences, Vol. 39, No. 3, pp. 463-474, 1999. R825370C064 (1998)
R825370C064 (1999)
not available
Journal Article Shyamsundar, N., H. Srinivasan, and R. Gadh, "Virtual De-manufacturing Via Virtual Disassembly to Design Environmentally Conscious Products." International Journal of Environmentally Conscious Design and Manufacturing, Vol. 1, No. 6, pp. 37-50, 1997. R825370C067 (1998)
not available
Journal Article Shyamsundar, N., A. Ashai, and R. Gadh, "Geometry Based Metric Formulation and Methodology to Support Virtual Design for Disassembly." Journal of Engineering Design and Automation, Vol. 4, No. 1, pp. 13-26, 1998. R825370C067 (1998)
not available
Journal Article Shyamsundar N, Gadh R. Geometric abstractions to support disassembly analysis. IIE Transactions 1999;31(10):935-946. R825370 (1999)
R825370C067 (1998)
R825370C067 (1999)
Journal Article Srinivasan H, Gadh R. A geometric algorithm for single selective disassembly using the wave propagation abstraction. Computer-Aided Design 1998;30(8):603-613 R825370C067 (1998)
not available
Journal Article Srinivasan, H. and R. Gadh, "Complexity Reduction in Geometric Selective Disassembly Using the Wave Propagation Abstraction." submitted to IEEE Transactions on Robotics and Automation, September, 1998. R825370C067 (1998)
not available
Journal Article Srinivasan H, Figueroa R, Gadh R. Selective disassembly for virtual prototyping as applied to de-manufacturing. Robotics and Computer-Integrated Manufacturing 1999;15(3):231-245. R825370 (1998)
R825370 (1999)
R825370C067 (1999)
Journal Article Srinivasan H, Chu C-CP, Gadh R. Virtual reality for design and manufacturing. Appliance Manufacturer Magazine 1999;(May):23-25. R825370 (1999)
R825370C067 (1999)
Journal Article Srinivasan H, Mo J, Figueroa R, Gadh R. Virtual analysis, I-CARVE's A3D Aid CAD projects. Silicon Graphics World Magazine 1999;(6):13-14. R825370 (1999)
R825370C067 (1999)
not available
Journal Article Srinivasan H, Gadh R. Efficient geometric disassembly of multiple components from an assembly using wave propagation. Journal of Mechanical Design 2000;122(2):179-184. R825370 (1999)
R825370C067 (1998)
R825370C067 (1999)
Journal Article Srinivasan H, Gadh R. A non-interfering selective disassembly sequence for components with geometric constraints. IIE Transactions 2002;34(4):349-361. R825370 (1999)
R825370C067 (1999)
Journal Article Suri RPS, Liu JB, Crittenden JC, Hand DW. Removal and destruction of organic contaminants in water using adsorption, steam regeneration, and photocatalytic oxidation: A pilot-scale study. Journal of the Air & Waste Management Association 1999;49(8):951-958 R825370 (1998)
R825370 (1999)
not available
Journal Article Suri, R.P.S., J.C. Crittanden, and D.W. Hand. "Removal and destruction of organic compounds in water using adsorption, steam regeneration, and photocatalytic oxidation processes." ASCE Journal of Environmental Engineering, Vol. 125, No. 10, pp. 897-905, 1999. R825370 (1999)
not available
Journal Article Watwe RM, Spiewak BE, Cortright RD, Dumesic JA. Density functional theory (DFT) studies of C1 and C2 hydrocarbons species on Pt clusters. Journal of Catalysis 1998;180(2):184-193. R825370 (1999)
R825370C056 (1998)
Journal Article Watwe RM, Spiewak BE, Cortright RD, Dumesic JA. Density functional theory (DFT) and microcalorimetric investigations of CO adsorption on Pt clusters. Catalysis Letters 1998;51(3-4):139-147. R825370 (1999)
R825370C056 (1998)
Journal Article Yaluris G, Madon RJ, Dumesic JA. 2-Methylhexane cracking on Y zeolites: catalytic cycles and reaction selectivity. Journal of Catalysis 1997;165(2):205-220. R825370 (1999)
R825370C056 (1998)
Meeting Baker, J.R., "ChemAlliance - A Compliance Assistance Center for the Chemical Industry." National Pollution Prevention Roundtable Spring National Meeting, Cincinnati, OH, April, 1998. R825370C046 (1998)
not available
Meeting Baker, J.R., "EPAS, A Product Design System for Informed Manufacturing Decisions." Environmental Engineering Seminar, Michigan Technological University, Houghton, MI, April, 1998. R825370 (1998)
not available
Meeting Baker, J.R. and R.S. Butner, Focus Group on Needs and Perspectives of Corporations for Complying with Environmental Regulations, AIChE Spring National Meeting, New Orleans, LA, March, 1998. R825370 (1998)
not available
Meeting Baker, J.R., Pollution Prevention Technical Assistance Group Meeting, Michigan Department of Environmental Quality, Lansing, MI, January, 1998. R825370 (1998)
not available
Meeting Baker, J.R., Sustainability of Manufacturing Extension and Pollution Prevention Outreach, Project Scoping Meeting with Northern Initiatives Corporation, Houghton, MI, March, 1998. R825370 (1998)
not available
Meeting Bulloch, J.L., Workshop Coordinator, Pollution Prevention Assessment Framework Workshop, Chicago, IL, August, 1998. R825370 (1998)
not available
Meeting Bulloch, J.L. "The Pollution Prevention Assessment Framework (P2 Framework): Tech Transfer from EPA to Industry." National Pollution Prevention Roundtable, Washington, DC, April, 1999. R825370C075 (1999)
not available
Meeting Carr, R.W., "Adsorptive Chemical Reactors." AIChE Annual Meeting, Dallas, TX, October-November, 1999. R825370C048 (1999)
not available
Meeting CenCITT Science Advisory Committee Meeting, Center Review and Update, held in conjunction with the Sixth Annual Environmental Science and Engineering Conference, "Balancing Progress and the Environment." University of Minnesota Campus, Minneapolis, MN, April, 1998. R825370 (1998)
not available
Meeting CenCITT Science Advisory Committee Meeting, 1999/2000 CenCITT Proposal Review, Chicago, IL, September, 1998. R825370 (1998)
not available
Meeting CenCITT Science Advisory Committee Meeting, Project Review and Poster Session, Michigan Technological University Campus, Houghton, MI, September, 1999. R825370 (1999)
not available
Meeting Chen, Y., J.C. Crittenden, D.W. Hand, and V.H. Selzer, "Advances in TiO2 Photocatalytic Oxidation Process." 22nd Annual Midwest Environmental Chemistry Workshop, Houghton, MI, October, 1999. R825370C073 (1999)
not available
Meeting Chen, H., B.R. O'Donnell, D.R. Shonnard, T.N. Rogers, B.A. Barna, E.J. Oman, and A.A. Kline, "Defining an Analytic Hierarchy Process (AHP)-Based Approach for Simultaneous Consideration of Environmental and Economic Process Attributes." AIChE Annual Meeting, Dallas, TX, Paper 217d, October-November, 1999a. R825370C065 (1999)
not available
Meeting Crittenden, J.C., Session Chair, "Applications of Life Cycle Assessment." United Engineering Foundation's Clean Products and Processes II Conference, Lake Arrowhead, CA, November, 1999. R825370 (1999)
not available
Meeting Crittenden, J.C., "CenCITT Initiatives in Clean Reaction Technologies." collaborative opportunities discussion, UVDI, Los Angeles, CA, August, 1998. R825370 (1998)
not available
Meeting Crittenden, J.C., "CenCITT Initiatives in Clean Reaction Technologies." collaborative opportunities discussion, Lynntech, College Station, TX, March, 1998. R825370 (1998)
not available
Meeting Crittenden, J.C., "CenCITT Initiatives in Clean Reaction Technologies." collaborative opportunities discussion, Amway Corporation, Grand Rapids, MI, June, 1998. R825370 (1998)
not available
Meeting Crittenden, J.C., "CenCITT Initiatives in Clean Reaction Technologies." collaborative opportunities discussion, Trojan Technologies, London, Ontario, August, 1998. R825370 (1998)
not available
Meeting Crittenden, J.C. and J.R. Baker, "CenCITT Initiatives in P2 Assessment and Risk Assessment." USEPA Office of Pollution Prevention and Toxics, Washington DC, December, 1997. R825370 (1998)
not available
Meeting Crittenden, J.C., "Economic and Environmental Conscious Decision-Making Through the Use of Pollution Prevention Assessment Tools." Michigan Sustainable Business Forum, Grand Rapids, MI, July, 1999. R825370C075 (1999)
not available
Meeting Crittenden, J.C., panelist and roadmapping group member, National Workshop on Process Waste Reduction via Separation Technologies and Separative Reactors, New Orleans, LA, February, 1998. R825370 (1998)
not available
Meeting Gadh R. Demonstration of Design for Disassembly (DFD) software and collaborative project discussions. Pratt & Whitney, Florida, 1999. R825370 (1999)
R825370C067 (1999)
not available
Meeting Gadh R. Demonstration of Design for Disassembly (DFD) software and collaborative project discussions. United Technologies Engineering Coordinate Activities, Connecticut, 1999. R825370 (1999)
R825370C067 (1999)
not available
Meeting Gadh R. Organized I-CARVE workshop for potential industrial collaborators, attended by companies such as Pratt & Whitney, Boeing, Ford Motor Company, General Motors, Caterpillar, Hayes & Lemmerz, Detroit, MI, July, 1999. R825370 (1999)
R825370C067 (1999)
not available
Meeting Gadh R. UW laboratory tour and collaborative project discussions, Chrysler Corporation, Madison, WI, October, 1998. R825370 (1999)
R825370C067 (1999)
not available
Meeting Kallio, E., B. Oonkhanond, and M.E. Mullins, "Preparation of ZSM-5 Membranes on Porous Alumina via Electrophoretic Deposition." AIChE Annual Meeting, Dallas, TX, October-November, 1999. R825370C055 (1999)
not available
Meeting Kallio, E. and M. E. Mullins, "Synthesis and Application of a Novel Zeolite Membrane Reactor." ACS Annual Meeting, Anaheim, CA, March, 1999. R825370C055 (1999)
not available
Meeting Li, Y., "Thermoplastics with Very High Kraft Lignin Contents." 7th Bio/Environmentally Degradable Polymer Society National Meeting, Cambridge, MA, August, 1998. R825370C032 (1998)
not available
Meeting Pletka, J., "Recovery of Waste Polymer Generated by Lost Foam Technology in the Metal Casting Industry." seminar at General Motors Powertrain, AMDC, Saginaw, MI, August, 1999. R825370C074 (1999)
not available
Meeting Radecki, P.P., "CenCITT Activities Update." Center for Waste Reduction Technologies Summer Meeting, Denver, CO, July, 1998. R825370 (1998)
not available
Meeting Sarkanen, S., "Plasticization of Alkylated 100% Kraft Lignin-Based Biodegradable Polymeric Materials." 217th American Chemical Society National Meeting, Anaheim, CA, March, 1999. R825370C032 (1999)
not available
Meeting Sarkanen, S., "Plasticizers that Transform Alkylated Kraft Lignins into Versatile Thermoplastics." invited seminar, Westvaco Corporation, Charleston, SC, September, 1999. R825370C032 (1999)
not available
Meeting Sarkanen, S., "Thermoplastics with Very High Kraft Lignin Contents." NCASI Central-Lake States Regional Meeting, Duluth, MN, May, 1998. R825370C032 (1998)
not available
Meeting Sarkanen, S., "Thermoplastics with Very High Lignin Contents." 215th American Chemical Society National Meeting, Dallas, TX, March, 1998. R825370C032 (1998)
not available
Meeting Shonnard, D.R., D.S. Hiew, and D.E. Stark, "Pollution Prevention by Assessing Environmental Impacts of Chemical Process Designs." American Institute of Chemical Engineers Spring National Meeting, New Orleans, LA, March, 1998. R825370C065 (1998)
not available
Meeting Sutherland, J.W., J.R. Baker, and P.P. Radecki, Environmentally Conscious Manufacturing at the National Center for Clean Industrial and Treatment Technologies, Michigan Technological University Manufacturing Initiative Blue Ribbon Committee Meeting, Houghton, MI, August, 1998. R825370C057 (1998)
not available
Meeting Zhang, Q., J.C. Crittenden, D.W. Hand, J.R. Mihelcic, and D.R. Hokanson, "Environmental Indices for Green Chemical Production and Use." 22nd Annual Midwest Environmental Chemistry Workshop, Houghton, MI, October, 1999. R825370C078 (1999)
not available
Paper Chatkunnaayuttaya, P., T.N. Rogers, A.M. Provost, M.E. Mullins, and D.S. Hiew, "Thermodynamic Study of Dilute Organic-Water Mixtures: A Proposed Model of Henry's Law Constant at Elevated Temperatures." Session 01A17: Posters--General Papers on Thermodynamics and Transport Properties I, Paper 86J, AIChE Annual Meeting, Dallas, TX, October-November, 1999. R825370C064 (1999)
not available
Presentation Baker JR, Crittenden JC, Oman EJ. Decision-making tools for the chemical process industry. Presented at the U.S. Environmental Protection Agency Tools for Sustainability Workshop, Washington, DC, February, 1999. R825370 (1999)
R825370C076 (1999)
not available
Presentation Baker JR, Barna BA, Bulloch JL, Crittenden JC, Crowl DA, Hand DW, Hokanson DR, Kline AA, Mayer AS, Mihelcic JR, Oman EJ, Patty RM, Radecki PP, Rogers TN, Shonnard DR, Semmens MJ, Hertz DW, Butner S. CenCITT's tools for sustainability. Poster presented at the United Engineering Foundation's Clean Products and Processes II Conference, Lake Arrowhead, CA, November 14-18, 1999. R825370 (1999)
R825370C076 (1999)
not available
Presentation Baker, J.R., Pollution Prevention and the National Center for Clean Industrial and Treatment Technologies, Presentation to Diplomatic Representatives of Argentina, Houghton MI, September, 1998. R825370 (1998)
not available
Presentation Bulloch, J.L., presentation and collaborative project discussions, BASF Corporation, Northline, MI, October, 1998. R825370 (1998)
not available
Presentation Bulloch, J.L., presentation and collaborative project discussions, Dow Chemical Company, Midland, MI, October, 1998. R825370 (1998)
not available
Presentation Bulloch, J.L., presentation and collaborative project discussions, Equilon, Shell Westhollow Technology Center, Houston, TX, August, 1998. R825370 (1998)
not available
Presentation Bulloch, J.L., presentation and collaborative project discussions, General Motors Corporation, Warren, MI, October, 1998. R825370 (1998)
not available
Presentation Bulloch, J.L., presentation and collaborative project discussions, Shell Chemical Company, Houston, TX, August, 1998. R825370 (1998)
not available
Presentation Carr, R.W., "Adsorptive Chemical Reactors." invited presentation, NICHE Conference (sponsored by Chemical Research Council), Marco Island, FL, June, 1999. R825370C048 (1999)
not available
Presentation Carr, R.W., "Partial Oxidations with a Simulated Countercurrent Moving Bed Chromatographic Reactor." invited presentation, 4th International Conference on Environmental Catalysis, Tokyo, Japan, January, 1999. R825370C048 (1999)
not available
Presentation Chen, H., B.R. O'Donnell, E.J. Oman, A.A. Kline, D.R. Shonnard, T.N. Rogers, B.A. Barna, and D.A. Crowl, "Integrated Assessment Tools as Process Simulator Enhancements for Chemical Engineering Education." poster presentation, AIChE Annual Meeting, Dallas, TX, October-November, 1999. R825370C065 (1999)
not available
Presentation Crittenden JC, Hautakangas H, Mihelcic JR, Li H, Oman EJ. Optimization and modeling of biofiltration for odor control. Presented at the WEFTEC '99, 72nd Annual Water Environment Federation (WEF) Conference and Exposition, New Orleans, LA, October 10-13, 1999. R825370 (1999)
R825370C076 (1999)
not available
Presentation Crittenden, J.C., "CenCITT Activities Update." presentation to Environmental Science & Technology Advisory Board, Chapel Hill, NC, May, 1998. R825370 (1998)
not available
Presentation Crittenden, J.C., presentation and collaborative project discussions, Abbott Laboratories, Chicago, IL, April, 1999. R825370C075 (1999)
not available
Presentation Crittenden, J.C. and J.L. Bulloch, presentation and collaborative project discussions, Amway Corporation, Grand Rapids, MI, February, 1999. R825370C075 (1999)
not available
Presentation Crittenden, J.C., presentation and collaborative project discussions, Dell Engineering, Grand Rapids, MI, July, 1999. R825370C075 (1999)
not available
Presentation Crittenden, J.C., presentation and collaborative project discussions, National Council for Air and Stream Improvement, Kalamazoo, MI, July, 1999. R825370C075 (1999)
not available
Presentation Crittenden, J.C., presentation and collaborative project discussions, Stephan Company, Chicago, IL, April, 1999. R825370C075 (1999)
not available
Presentation Crittenden, J.C., presentation and collaborative project discussions, U.S. EPA National Risk Management Research Laboratory, Cincinnati, OH, December, 1998. R825370 (1999)
not available
Presentation Crittenden, J.C., Presentation on CenCITT Research, Pollution Prevention Assessment Framework Workshop, Chicago, IL, August, 1998. R825370 (1998)
not available
Presentation Gadh R. Demonstration of Design for Disassembly (DFD) software. Presented at the Workshop on Motion Support in Virtual Prototyping, Stanford University, Stanford, CA, May 5-7, 1999 R825370 (1999)
R825370C067 (1999)
not available
Presentation Gadh R. Industry seminars presented at various companies: United Technologies, Unigraphics Solutions, Ford Motor Company, Hayes & Lemmerz, Boeing, IBM Research Laboratories, and Lucent Technologies, 1999. R825370 (1999)
R825370C067 (1999)
not available
Presentation Gadh, R., industry seminars presented at various companies: Pratt and Whitney, Ford Motor Company, Chrysler Technical Center, ALCOA Technical Center, CMI International - Technical Center, IBM Research Labs, and Lucent Technologies, 1998. R825370C067 (1998)
not available
Presentation Oman EJ, Crittenden JC. Application of process design tools for pollution prevention. Presented at the U.S. Environmental Protection Agency Tools for Sustainability Workshop, Washington, DC, February, 1999. R825370 (1999)
R825370C076 (1999)
not available
Presentation Oman EJ, Hand DW, Crittenden JC, Hokanson DR, Carter DL, Martin CE. Characterization and optimization of three phase catalytic oxidation processes in the International Space Station (ISS) water processor. Presented at the 29th International Conference on Environmental Systems (ICES), Denver, CO, July 12-15, 1999. R825370 (1999)
R825370C076 (1999)
not available
Presentation Oman EJ, Audeves D, Hokanson DR, Hand DW, Crittenden JC, Rogers TN. Modeling and optimization of a catalytic wet-oxidation process used for water recycling applications. Presented at WEFTEC '99, 72nd Annual Water Environment Federation (WEF) Conference and Exposition, New Orleans, LA, October 10-13, 1999. R825370 (1999)
R825370C076 (1999)
not available
Presentation Pletka, J. and J. Drelich, "Recovery of Waste Polymer Generated by Lost Foam Technology in the Metal Casting Industry." poster presentation, Michigan Technological University's Graduate Student Council, Houghton, MI, October, 1999. R825370C074 (1999)
not available
Presentation Sever R.R. and T.W. Root, "Environmentally Benign Processing with Hydrogen Peroxide." poster presentation, University of Wisconsin-Madison Chemical Engineering Graduate Recruiting Festival, Madison, WI, February-March, 1999. R825370C072 (1999)
not available
Presentation Velazquez-Carillo, M., J.R. Mihelcic (presenter), and J.C. Crittenden, "Use of Material Selection Target Plots for Screening Chemicals based on Environmental and Health Properties." poster presentation, United Engineering Foundation's Clean Products and Processes II Conference, Lake Arrowhead, CA, November, 1999. R825370C078 (1999)
not available
Presentation Yang J, Oman EJ, Hand DW, Hokanson DR, Crittenden JC. Mathematical modeling of isothermal-three phase separative reactor systems. Poster presented at the United Engineering Foundation's Clean Products and Processes II Conference, Lake Arrowhead, CA, November 14-19, 1999. R825370 (1999)
R825370C076 (1999)
not available
Presentation Zhang, Q., J.C. Crittenden, D.W. Hand, J.R. Mihelcic, and D.R. Hokanson (presenter), "Environmental Indices for Green Chemical Production and Use." poster presentation, United Engineering Foundation's Clean Products and Processes II Conference, Lake Arrowhead, CA, November, 1999. R825370C078 (1999)
not available
Proceedings Batzer, S.A., T. Cao, and J.W. Sutherland, "Effects of Cutting Fluid Composition on the Dimensional Accuracy of Tapped Threads." submitted to NAMRC XXVII, 1998. R825370C057 (1998)
not available
Proceedings Crittenden JC, Hautakangas H, Mihelcic JR, Li H, Oman EJ. Optimization and modeling of biofiltration for odor control. In: Proceedings of the WEFTEC '99, 72nd Annual Water Environment Federation (WEF) Conference and Exposition, New Orleans, LA, October 10-13, 1999. R825370 (1999)
R825370C076 (1999)
not available
Proceedings Crittenden, J.C., V.H. Selzer, D.W. Hand, D.L. Perram, Y. Chen, and M.E. Mullins, "Toward the Development of Commercial Applications of Photocatalysis." Proceedings of the 1998 Pan-American Workshop on Commercialization of Advance Oxidation Technologies, London, Ontario, pp. 30-1 to 30-25, June, 1998. R825370 (1998)
not available
Proceedings Gadh, R., H. Srinivasan, N. Shyamsundar, and R. Figueroa, "Virtual disassembly - A Software Tool for Developing Product Dismantling and Maintenance Systems." Proceedings of the Symposium on Reliability and Maintainability, pp. 120-125, Anaheim, CA, January, 1998. R825370C067 (1998)
not available
Proceedings Li, Y. and S. Sarkanen, "Plasticizers that Transform Alkylated Kraft Lignins into Versatile Thermoplastics." Proceedings of 10th International Symposium Wood Pulp. Chem., I, pp. 492-495, 1999. R825370C032 (1999)
not available
Proceedings Olson, W.W., S.M. Pandit, J.W. Sutherland, and H. Xue, "Life Cycle Analysis Using Input-Output Analysis with Markov Decision Processes." Proceedings of the 1998 NSF Design & Manufacturing Grantees Conference, pp. 9-10, 1998. R825370C057 (1998)
not available
Proceedings Olson, W.W., J.B. Wang, J. Zeng, and J.W. Sutherland, "Reducing Manufacturing Impacts on the Environment with Markov Decision Making." Proceedings of the Japan - U.S.A. Symposium on Flexible Automation, pp. 191-198, July, 1998. R825345 (Final)
R825370C057 (1998)
not available
Proceedings Oman EJ, Audeves D, Hokanson DR, Hand DW, Crittenden JC, Rogers TN. Modeling and optimization of a catalytic wet-oxidation process used for water recycling applications. In: Proceedings of the WEFTEC '99, 72nd Annual Water Environment Federation (WEF) Conference and Exposition, New Orleans, LA, October 10-13, 1999. R825370 (1999)
R825370C076 (1999)
not available
Proceedings Sarkanen, S. and Y. Li, "Plasticizers that Transform Alkylated Kraft Lignins into Thermoplastics: In Biomass- A Growth Opportunity in Green Energy and Value-Added Products." Overend, R.P., Chornet, E., Eds., Elsevier Science, Oxford, England, Proceedings 4th Biomass Conference Americas, 1, pp. 533-539, 1999. R825370C032 (1999)
not available
Proceedings Sheng, P., D. Bauer, J.W. Sutherland, T. Cao, A. Gandhi, R.E. DeVor, and S. Skerlos, "Web-Based Cutting Fluid Evaluation Software." Proceedings of CIRP International Seminar on Manufacturing Systems, Berkeley, CA, May, 1998. R825370C057 (1998)
not available
Proceedings Shyamsundar, N., T. Dani, R. Sonthi, and R. Gadh, "Shape Abstractions and Representations to Enable Internet-based Collaborative Design." Proceedings of the Japan-USA Symposium on Flexible Automation, July, 1998. R825370C067 (1998)
not available
Proceedings Srinivasan H, Gadh R. Selective disassembly: representation and comparative analysis of wave propagation abstractions in sequence planning. In: Proceedings of the 1999 IEEE International Symposium on Assembly and Task Planning, Porto, Portugal, July 21-24, 1999, pp. 129-134. R825370 (1999)
R825370C067 (1999)
Proceedings Srinivasan H, Gadh R. A non-interfering sequence for virtual disassembly in maintenance. In: Proceedings of the Workshop on Motion Support in Virtual Prototyping, Stanford University, May 5-7, 1999. R825370 (1999)
R825370C067 (1999)
not available
Proceedings Srinivasan H, Gadh R. Selective disassembly of components with geometric constraints. In: Proceedings of ASME Design Engineering Technical Conferences, Las Vegas, NV, Paper No. DETC99/DFM-8961, September 12-15, 1999. R825370 (1999)
R825370C067 (1999)
not available
Proceedings Srinivasan, H. and R. Gadh, "A Methodology to Design for Selective Disassembly." Proceedings of the International Symposium on Tools & Methods for Concurrent Engineering, pp. 321-328, Manchestor, UK, April, 1998. R825370C067 (1998)
not available
Proceedings Srinivasan, H. and R. Gadh, "Complexity Reduction in Geometric Selective Disassembly Using the Wave Propagation Abstraction." Proceedings of the International Conference on Robotics and Automation, pp. 1478-1483, Leuven, Belgium, May, 1998. R825370C067 (1998)
not available
Proceedings Sutherland, J.W., Y. Yue, Y. Zheng, K. Gunter, and T. Cao, "Evaluation of Environmental Effects and Process Impact of Cutting Fluids." Proceedings of the 1998 NSF Design & Manufacturing Grantees Conference, pp. 369-370, 1998. R825370C057 (1998)
not available
Proceedings Sutherland, J.W., S. Basu, and A. Gandhi, "Pollution Prevention in Machining." Proceedings of 1998 National Pollution Prevention Roundtable Conference, Cincinnati, OH, April, 1998a. R825370C057 (1998)
not available
Proceedings Yue, Y., Y. Zheng, S. Basu, and J.W. Sutherland, "Cutting Fluids: Performance Measures and Health Related Characteristics." Proceedings of the Japan - U.S.A. Symposium on Flexible Automation, pp. 199-208, July, 1998. R825370C057 (1998)
not available
Report Noguera D.R. and M.A. Drnevich, "Recovery of Valuable Polymers from Sewage Sludge." Final Report, University of Wisconsin System, Solid Waste Management and Research Program, October, 1999. R825370C071 (1999)
not available
Symposium Li, Y. and S. Sarkanen, "Thermoplastics with Very High Lignin Contents." ACS Symposium Series, Vol. 742, pp. 351-366, 1999. R825370C032 (1998)
R825370C032 (1999)
not available
Symposium Sarkanen, S., "Plasticizers that Transform Alkylated Kraft Lignins into Versatile Thermoplastics." Tenth International Symposium on Wood and Pulping Chemistry, Yokohama, Japan, June, 1999. R825370C032 (1999)
not available
Symposium Sarkanen, S., "The First Alkylated 95-100% Kraft Lignin-Based Plastics." Ninth International Symposium on Wood and Pulping Chemistry, Montreal, Canada, June, 1997. R825370C032 (1998)
not available
Working Group/Panel Baker, J.R., workgroup participant, "Research and Technology Transfer." National Pollution Prevention Roundtable, Cincinnati, OH, May, 1998. R825370C046 (1998)
not available