You are here:
DEVELOPMENT AND VERIFICATION OF A SCREENING MODEL FOR SURFACE SPREADING OF PETROLEUM
Citation:
Hussein, M., M. Jin, AND J W. Weaver. DEVELOPMENT AND VERIFICATION OF A SCREENING MODEL FOR SURFACE SPREADING OF PETROLEUM. JOURNAL OF CONTAMINANT HYDROLOGY 57(3-4):281-302, (2002).
Impact/Purpose:
The current focus is to 1.) develop, distribute, and support the FRAMES-3MRA modeling technology, 2) to apply the FRAMES-3MRA modeling technology for the purposes of executing national and site-specific risk assessments, 3) to complete model application case studies to explore model performance issues, such as, model validation, 5) to collaborate with other Federal Agencies in an effort to leverage expertise and resources associated with common modeling interests, and 6) to monitor ongoing developments at the Office of Solid Waste and within the environmental modeling community in an effort to identify new needs for science modules and locate or develop solutions within the FRAMES 3MRA modeling system.
Description:
Overflows and leakage from aboveground storage tanks and pipelines carrying crude oil and petroleum products occur frequently. The spilled hydrocarbons pose environmental threats by contaminating the surrounding soil and the underlying ground water. Predicting the fate and transport of these chemicals is required for environmental risk assessment and for remedial measure design. The present paper discusses the formulation and application of the Oil Surface Flow Screening Model (OILSFSM) for predicting the surface flow of oil by taking into account infiltration and evaporation. Surface flow is simulated using a semi-analytical model based on the lubrication theory approximation of viscous flow. Infiltration is simulated using a version of the Green and Ampt infiltration model, which is modified to account for oil properties. Evaporation of volatile compounds is simulated using a compositional model that accounts for the changes in the fraction of each compound in the spilled oil. The coupling between surface flow, infiltration and evaporation is achieved by incorporating the infiltration and evaporation fluxes into the global continuity equation of the spilled oil. The model was verified against numerical models for infiltration and analytical models for surface flow. The verification study demonstrates the applicability of the model.