Science Inventory

Influence and efficiency of catalytic stripper in organic carbon removal from laboratory generated soot aerosols

Citation:

Pavlovic, J. AND J. Kinsey. Influence and efficiency of catalytic stripper in organic carbon removal from laboratory generated soot aerosols. AAAR 2012 Annual Meeting, Minneapolis, MN, October 08 - 12, 2012.

Impact/Purpose:

This study was performed to evaluate the efficiency of catalytic stripper in removing particle-phase and semivolatile organic carbon under different experimental conditions.

Description:

A catalytic stripper (CS) is a device used to remove the semi-volatile, typically organic carbon, fraction by passing raw or diluted exhaust over an oxidation catalyst heated to 300˚C. The oxidation catalyst used in this study is a commercially available diesel oxidation catalyst (DOC), designed to remove volatile hydrocarbon from the diesel exhaust by oxidizing the volatile hydrocarbon species to CO2 and H2O (1). The experimental system consisted of a soot generator, low speed flow tunnel, Scanning Mobility Particle Sizer (SMPS) instrument to monitor the number concentration as well as the size distribution, and a particulate matter (PM) mass measurement system. The PM mass concentration was measured by the filter sampling followed by the thermal/optical carbon analysis, multi-angle absorption photometry (MAAP), photoacoustic measurement, and laser-induced incandescence (LII). The responses of all instruments were evaluated with and without the CS to explore the efficiency of CS in removing the volatile particles. The specific emphasis was placed on the analysis of thermograms and OC and EC sub-fractions from the thermal/optical analysis, and the SMPS data, to gain deeper insights about the size and thermal characteristics of the OC removed by the CS as well as the OC and EC measured downstream of the CS. Influence of different inlet EC/OC ratios, different inlet soot concentrations, and position of the CS in the experimental system were also investigated. 1. Khalek, I. A. (2007). Sampling system for solid and volatile exhaust particle size, number, and mass emissions, SAE Paper 2007-01-0307, Society of Automotive Engineers, Warrendale, MI.

URLs/Downloads:

CATALYTIC STRIPPER-JELICA PAVLOVIC_V3.PPTX

Record Details:

Record Type: DOCUMENT (PRESENTATION/SLIDE)
Product Published Date: 10/08/2012
Record Last Revised: 03/17/2015
OMB Category: Other
Record ID: 307281

Organization:

U.S. ENVIRONMENTAL PROTECTION AGENCY

OFFICE OF RESEARCH AND DEVELOPMENT

NATIONAL RISK MANAGEMENT RESEARCH LABORATORY

AIR POLLUTION PREVENTION AND CONTROL DIVISION

EMISSIONS CHARACTERIZATION AND PREVENTION BRANCH