You are here:
ANDalyze Lead 100 Test Kit and AND1000 Fluorimeter Environmental Technology Verification Report and Statement
McKernan, J. AND B. Yates. ANDalyze Lead 100 Test Kit and AND1000 Fluorimeter Environmental Technology Verification Report and Statement. U.S. Environmental Protection Agency, Washington, DC, EPA/600/R-14/052, 2014.
This report provides results for the verification testing of the Lead100/AND1000. The following is a description of the technology based on information provided by the vendor. The information provided below was not verified in this test. The ANDalyze Lead100/AND1000 was designed to detect the presence of and measure the concentration of Pb in drinking water and environmental waters. Testing is intended to take place onsite at the source of collection or in a temperature controlled facility without sample preservation. The test makes use of two primary components: a handheld fluorimeter (AND1000) and a consumable test kit (Lead100) specific to each metal or target (in the present case, Pb).
EPA supports the ETV Program to facilitate the deployment of innovative environmental technologies through performance verification and dissemination of information. The goal of the ETV Program is to further environmental protection by accelerating the acceptance and use of improved and cost-effective technologies.
Record Details:Record Type: DOCUMENT (PUBLISHED REPORT/REPORT)
Organization:U.S. ENVIRONMENTAL PROTECTION AGENCY
OFFICE OF RESEARCH AND DEVELOPMENT
NATIONAL RISK MANAGEMENT RESEARCH LABORATORY