You are here:
MEETING IN CHARLOTTE: METHODS FOR THE ANALYSIS OF PRIORITY DBPS IN RO-CONCENTRATED DRINKING WATER
Citation:
BODIN, N., H. S. WEINBERG, S. W. KRASNER, S. D. RICHARDSON, J. G. PRESSMAN, T. F. SPETH, R. J. MILTNER, AND J. E. SIMMONS. MEETING IN CHARLOTTE: METHODS FOR THE ANALYSIS OF PRIORITY DBPS IN RO-CONCENTRATED DRINKING WATER. Presented at 2007 Water Quality Technology Conference, Charlotte, NC, November 04 - 08, 2007.
Impact/Purpose:
(1) Use a toxicity-based approach to prioritize and identify DBPs that show the greatest toxic response. (2) Comprehensively identify DBPs formed by different disinfectant regimes for the 'Four Lab Study'. (3) Determine the mechanisms of formation for potentially hazardous bromonitromethane DBPs.
Description:
The ability to understand mechanisms of formation and occurrence of disinfection by-products (DBPs) resulting from treatment of natural waters has been limited to those formed at ug/L levels. Toxicological evaluations suggest that many of the DBPs missing from current regulation may be of greater concern to public health, but because of their sub-ug/L levels and resulting challenges to analytical methods, we have little occurrence data for them. Scaling-up drinking water DBPs by concentrating (~130-fold with RO) the total organic carbon from a treated surface water and subjecting the concentrate to chlorination generated higher levels of all DBPs that could then be detectable using currently available methods. Moreover, such a water was used in toxicological evaluations, so characterization of the DBPs formed was critical. This presentation will discuss approaches that have been used to adapt the methods used in our laboratories for the accurate quantitation of many of the priority DBPs in the chlorinated RO concentrates of natural water. The targeted DBPs included, among others, expanded numbers of chlorine-and bromine-containing haloketones, haloacetaldehydes, haloacetonitriles, halonitromethanes, haloacetamides, and halofuranones, as well as iodinated trihalomethanes. Different dilutions were prepared, standard additions used where appropriate, and recovery of analytes calculated. Methods were generated that balanced accuracy with quantifiable detection and subsequently revealed whether priority DBPs might be formed during drinking water treatment.