You are here: DERA » DEQ Home » Start Over » Create New Project

Contact Us: DEQhelp@epa.gov

Not logged in | login | help
Note: Your session will time out after 30 minutes of inactivity.
For best results, do not use your browser's “back” arrow.

Create New Project

Project Name

To estimate Total Cost Effectiveness for this project, enter total costs in the field below. Total costs reflect all costs related to this project, including capital and administrative costs.

Total Project Costs $

To estimate Capital Cost Effectiveness for an upgrade, enter the unit and labor costs on the ‘Add Upgrade’ or ‘Edit Upgrade’ screen. These costs are also used to estimate annualized capital costs for comparison with annual health benefits.

You may estimate both Total Cost and Capital Cost Effectiveness.

| Cancel

Options for engine groups and reduction percentages for upgrades are based on application. Changing the application will invalidate these selections and cause groups and upgrades to be deleted.
Are you sure?

To ensure DEQ results reflect changes to your vehicle group, you must re-enter your inputs for upgrades. Current upgrade inputs will be deleted to properly reset the calculator. Do you wish to continue?

‘Long haul’ is a trip of over 200 miles;
‘Short haul’ is a trip of 200 miles or less.
A ‘combination’ is a tractor with at least 1 trailer;
A ‘single unit’ is a truck on a single frame.

If your upgrade involves switching to a fuel other than ULSD, B5 or B20, select ‘Engine or Vehicle Replacement’ under ‘Add an Upgrade’ and then select the option with the new fuel type under ‘Upgrade’.

For guidance on use of the DEQ for more advanced scenarios, please refer to the following documents:

Electrified Parking Spaces Facility: Emission Reduction Calculation (PDF) (1 pg, 456 K, About PDF)