Search Results for the EPA National Library Catalog

Items Found: 228

Showing: Items 1 - 50

Your Search: (SUBJECT=Water pipes)

 
 
 

1 2 3 4 5 NEXT
Select Item Title Year Published
A general framework for corrosion control based on utility experience / 1997
A summary of leak detection methods for petroleum underground storage tank systems. 1990
Action of water on lead with special reference to the supply of drinking water summary of existing knowledge. 1934
American national standard for cement-mortar lining for ductile-iron pipe and fittings for water / 1985
American national standard for cement-mortar lining for ductile-iron pipe and fittings for water. 1995
American national standard for cement-mortar lining for ductile-iron pipe and fittings for water. 1990
American national standard for ductile-iron pipe, centrifugally cast, for water / 1996
Ammonia from chloramine decay : effects on distribution system nitrification / 2003
ANSI/AWWA C223-13 : fabricated steel and stainless steel tapping sleeves / 2013
Assessment and renewal of water distribution systems 2004
Assessment of existing and developing water main rehabilitation practices 1990
Assessment of non-uniform corrosion in copper piping 2008
AWWA standard for air-release, air-vacuum, and combination air valves for waterworks service. 1992
AWWA standard for asbestos-cement distribution pipe, 4 in. through 16 in. (100 mm through 400 mm), for water distribution systems. 1993
AWWA standard for ball valves 6 in. through 48 in. 1986
AWWA standard for ball valves, 6 in. through 48 in. (150 mm through 1200 mm). 1992
AWWA standard for bolted, sleeve-type couplings for plain-end pipes. 1997
AWWA standard for bolted, sleeve-type couplings for plain-end pipes. 1992
AWWA standard for cement-mortar lining of water pipelines in place : 4 in. (100 mm) and larger. 1996
AWWA standard for cement-mortar lining of water pipelines--4 in. (100mm) and larger-- in place. 1990
AWWA standard for cement-mortar protective lining and coating for steel water pipe : 4 in. and larger-- shop applied. 1989
AWWA standard for coal-tar protective coatings and linings for steel water pipelines : enamel and tape-- hot applied. 1997
AWWA standard for coal-tar protective coatings and linings for steel water pipelines, enamel and tape, hot applied. 1992
AWWA standard for coating the exterior of aboveground steel water pipelines and fittings. 1991
AWWA standard for coating the exterior of aboveground steel water pipelines and fittings. 1996
AWWA standard for cold-applied petrolatum tape and petroleum wax tape coatings for the exterior of special sections, connections, and fittings for buried or submerged steel water pipelines. 1995
AWWA standard for cold-applied petrolatum tape and petroleum wax tape coatings for the exterior of special sections, connections, and fittings for buried steel water pipelines. 1991
AWWA standard for cold-applied tape coatings for the exterior of special sections, connections, and fittings for steel water pipelines. 1996
AWWA standard for cold-applied tape coatings for the exterior of special sections, connections, and fittings for steel water pipelines. 1991
AWWA standard for disinfecting water mains. 1993
AWWA standard for disinfection of water treatment plants. 1997
AWWA standard for fiberglass pressure pipe. 1989
AWWA standard for fiberglass pressure pipe. 1996
AWWA standard for field welding of steel water pipe. 1997
AWWA standard for heat-shrinkable cross-linked polyolefin coatings for the exterior of special sections, connections, and fittings for steel water pipelines. 1989
AWWA standard for installation of asbestos-cement pressure pipe. 1996
AWWA standard for installation of asbestos-cement pressure pipe. 1991
AWWA standard for installation of ductile-iron water mains and their appurtenances. 1994
AWWA standard for liquid-epoxy coating systems for the interior and exterior of steel water pipelines 1993
AWWA standard for liquid-epoxy coating systems for the interior and exterior of steel water pipelines. 1997
AWWA standard for metal-seated gate valves for water supply service / 1993
AWWA standard for molecularly oriented polyvinyl chloride (PVCO) pressure pipe, 4 in. through 12 in. (100 mm through 300 mm), for water distribution. 1998
AWWA standard for polyethylene (PE) pressure pipe and fittings, 4 in. through 63 in., for water distribution. 1992
AWWA standard for polyvinyl chloride (PVC) pressure fittings for water-- 4 in. through 8 in. (100 mm through 200 mm). 1992
AWWA standard for polyvinyl chloride (PVC) pressure pipe and fabricated fittings, 14 in. through 48 in. (350 mm through 1200 mm), for water transmission and distribution. 1997
AWWA standard for polyvinyl chloride (PVC) pressure pipe and fabricated fittings, 4 in. through 12 in. (100 mm through 300 mm), for water distribution. 1998
AWWA standard for polyvinyl chloride (PVC) pressure pipe, 4 in. through 12 in., for water distribution. 1989
AWWA standard for PVC self-tapping saddle tees for use on PVC pipe. 1997
AWWA standard for reinforced concrete pressure pipe, steel-cylinder type, for water and other liquids. 1989
AWWA standard for reinforced concrete pressure pipe, steel-cylinder type. 1997
1 2 3 4 5 NEXT

Save, Print or Email Selected Records