Search Results for the EPA National Library Catalog

Items Found: 57

Showing: Items 1 - 50

Your Search: (SUBJECT=Service life)

 
 
 

1 2 NEXT
Select Item Title Year Published
A Primer for financial analysis of pollution prevention projects / 1993
AST '94 (Aboveground Storage Tanks). Held in Dallas, Texas on September 27-29, 1994. 1994
Average lifetime periods for light-duty trucks and heavy-duty vehicles / 1979
Broad-Based Environmental Life Cycle Assessment. 1993
Constraints and Categories of Vadose Zone Monitoring Devices. 1984
Cost Effectiveness Analysis. 1995
Design, construction, and maintenance of cover systems for hazardous waste : an engineering guidance document / 1987
Design, construction, and maintenance of cover systems for hazardous waste an engineering guidance document / 1987
Economic Assessment of Pollution Related Corrosion Damage. 1982
Economic damages to household items from water supply use / 1973
EPA clean products research program 1991
EPA's Life Cycle Methodology: Guidelines for Use in Development of Packaging. 1992
EPA's Research in LCA Methodology. 1993
Evaluation of septic tank system effects on ground water quality / 1984
Evaluation of septic tank system effects on ground water quality. / 1984
Evaluation of the Report on Interceptor Sewers and Suburban Sprawl. 1975
Guidelines for assessing the quality of life-cycle inventory data 1995
Guidelines for assessing the quality of life-cycle inventory data {microfiche} 1995
Importance of Life Cycle Assessment. 1994
Integration of Pollution Prevention Tools. 1997
Investigation of Corrosion-Deposition Phenomena on Gas Turbine Blades. 1973
Investigation of sanitary landfill behavior : volume II. supplement to the final report / 1979
Life Cycle Analysis: Its Place in Waste Management. 1993
Life cycle design framework and demonstration project profiles of AT&T and AlliedSignal / 1995
Life cycle design framework and demonstration projects : profiles of AT & T and AlliedSignal / 1995
Life cycle design guidance manual : environmental requirements and the product system / 1993
Life cycle design guidance manual : environmental requirements and the product system / 1993
Life Cycle Design of a Fuel Tank System. General Motors Demonstration Project. 1998
Life cycle design of air intake manifolds phase II: lower plenum of the 5.4 L F-250 air intake manifold, including recycling scenarios / [electronic resource] : 2001
Life cycle design of amorphous silicon photovoltaic modules / 1997
Life cycle design of in-mold surfacing film 3M demonstration project / [electronic resource] : 2001
Life cycle design of milk and juice packaging / 1997
Life-Cycle Improvements Analysis: Procedure Development and Demonstration. 1993
Lining of Waste Impoundment and Disposal Facilities. 1980
Machine Coolant Waste Reduction by Optimizing Coolant Life. 1989
Machine Coolant Waste Reduction by Optimizing Coolant Life. Project Summary. 1995
Management of Water Distribution System Components. 1987
Markets for scrap tires / 1991
Markets for scrap tires. 1991
Motorcycle maintenance and test intervals. 1975
Motorcycle useful life / 1975
NAS Report on Technological Feasibility of 1975-76 Motor Vehicle Emissions Standards. Feasibility of Meeting the 1975-1976 Exhaust Emission Standards in Actual Use. 1973
Nonroad mobile source sales and attrition study: identification and evaluation of available data sources. / 1993
Operating Capacity of GAC Adsorbers: Dissolved Oxygen and Extended Service Life. 1994
Operation of Low Speed Gallium Lubricated Tungsten Slipring Assembly in Vacuum for 500 Hours. 1971
Overview of Evaluating Targets of Opportunity. 1994
Pollution Prevention Research Ongoing: EPA's Risk Reduction Engineering Laboratory. 1993
Proceedings: EPA/AEERL's Indoor Air Quality/Pollution Prevention Workshop. Held in Raleigh, North Carolina on March 9-10, 1993. 1993
Proposed New Portable Air Compressor Regulation: Supplementary Economic Impact Analysis. 1975
Review of EPA Materials Program: Environmental Testing. 1989
1 2 NEXT

Save, Print or Email Selected Records