Search Results for the EPA National Library Catalog

Items Found: 53

Showing: Items 1 - 50

Your Search: (SUBJECT=Reinforced plastics)

 
 
 

1 2 NEXT
Select Item Title Year Published
A study of the feasibility of utilizing solid wastes for building materials : phase III and IV summary reports / 1978
Addendum to assessment of styrene emission controls for FRP/C and boat building industries / 1996
Addendum to assessment of styrene emission controls for FRP/C and boat building industries : project summary 1996
Aerosol Filtration Efficiency of In-Duct Air Cleaners. 1998
Air emissions from reinforced plastics composite manufacturing process Lasco panel products : final report. Vol. 1. Report text, appendix A.1 / 1999
Air emissions from reinforced plastics composite manufacturing process Lasco panel products : final report. Vol. 2. Appendix A.2 / 1999
Air Emissions from Reinforced Plastics Composite Manufacturing Process LASCO Panel Products: Volume 3. 1999
Amplification of 'Penicillium chrysogenum' on Three HVAC Duct Materials. 1996
An evaluation of tailings ponds sealants / 1974
Analytical Techniques for Measuring Hydrocarbon Emissions from the Manufacture of Fiberglass-Reinforced Plastics. 1998
Assesment of Styrene Emission Controls for FRP/C and Boat Building Industries (on Diskette). 1996
Assessment of Styrene Emission Control Technologies for the FRP and Boat Building Industries. 1996
Assessment of styrene emission controls for FRP/C and boat building industries / 1996
Assessment of VOC emissions from fiberglass boat manufacturing / 1990
AWWA standard for contact-molded, fiberglass-reinforced plastic wash water troughs and launders. 1991
AWWA standard for contact-molded, fiberglass-reinforced plastic wash water troughs and launders. 1997
AWWA standard for fiberglass pressure pipe. 1989
Characterization of Carbon Fiber Emissions from Current and Projected Activities for the Manufacture and Disposal of Carbon Fiber Products Project Summary 1984
Characterization of Carbon Fiber Emissions from Current and Projected Activities for the Manufacture and Disposal of Carbon Fiber Products. 1984
Compliance guide for small businesses to the reinforced plastic composites production NESHAP, 40 CFR 63, Subpart WWWW 2005
Covering Bottom Sediments as a Lake Restoration Technique. 1981
Disruption of the Primary Fouling Sequence on Fiber Glass-Reinforced Plastic Submerged in the Marine Environment. 1981
Dusts and residues from machining and incinerating graphite/epoxy composites : a preliminary study / 1979
Economic impact analysis of proposed reinforced plastics NESHAP. 2001
Economic impact analysis of proposed reinforced plastics NESHAP. 2001
Economic impact analysis of the final reinforced plastics NESHAP / 2002
Economic impact analysis of the final reinforced plastics NESHAP / 2002
Effectiveness of vacuum cleaning on fungally contaminated duct materials / 1997
EPA Office of Compliance Sector Notebook Project : profile of the plastic resin and manmade fiber industries. 1997
Evaluation of Pollution Prevention Techniques to Reduce Styrene Emissions from Open Contact Molding Processes. Volume 1. Final Report. 1997
Evaluation of Pollution Prevention Techniques to Reduce Styrene Emissions from Open Contact Molding Processes. Volume 2. Appendices. 1997
Evaluation of the hazard of static electricity in nonmetallic pol systems -- static effects in handling jet fuel in fiberglass reinforced plastic pipe 1973
Evaluation of the Polyad (Trade Name) FB Air Purification and Solvent Recovery Process for Styrene Removal. 1993
Fiberglass-reinforced plastic pressure vessels. 0
Fiberglass-reinforced plastics deskbook 1978
Fillers and reinforcements for plastics; a symposium co-sponsored by the ACS Division of Organic Coatings and Plastics Chemistry and the Plastics Institute of America at the 166th Meeting of the American Chemical Society, Chicago, Ill., Aug. 27-29, 1973. 1974
FRP Model (Version 1.0) for Estimating Styrene Emissions from Fiber-Reinforced Plastics Fabrication Processes (on Diskette). 1998
Glass reinforced plastics. 1970
Guides to pollution prevention : the fiberglass-reinforced and composite plastics industry. 1991
Guides to pollution prevention : the fiberglass-reinforced and composite plastics industry. 1991
Modification of the quality assurance project plan for the WRITE Program with states : evaluation of pollution prevention issues for acetone usage in the fiberglass industry / 1992
Occupational Styrene Exposure for Twelve Product Categories in the Reinforced-Plastics Industry. 1985
Plant Performance at the Owens-Corning Fiberglas Corporation. Wastewater Treatment Facility, Anderson, South Carolina, March 1973 - May 1973. 1973
Reducing Emissions in Fiberglass Reinforced Plastics Manufacuring. 2002
Reproductive Outcomes in Women Exposed to Solvents in 36 Reinforced Plastics Companies. 1. Menstual Dysfunction. 1985
Securing Containerized Hazardous Wastes by Encapsulation with Spray-On/Brush-On Resins. 1981
Securing Containerized Hazardous Wastes with Polyethylene Resin and Fiberglass Encapsulates. 1981
Status, trends and implications of carbon fiber material use {MCROFICHE} 1982
Study of the Feasibility of Utilizing Solid Wastes for Building Materials. Phase I Summary Report. 1978
Study of the Feasibility of Utilizing Solid Wastes for Building Materials. Phase II. Summary Report. 1978
1 2 NEXT

Save, Print or Email Selected Records