Search Results for the EPA National Library Catalog

Items Found: 191
Showing: Items 101 - 150
Your Search: (SUBJECT=Metal finishing)


 
 
 
PREV 1 2 3 4 NEXT
Select Item Title Year Published
Management of metal-finishing sludge / 1977
Meeting hazardous waste requirements for metal finishers. 1987
Metal finishing guidance manual : a practical guide to environmental compliance and continuous improvement / 1996
Metal Plating Wastes in Municipal Sewerage Systems. 1956
Modifications to reduce drag out at a printed circuit board manufacturer / 1992
National Metal Finishing Environmental R and D Plan: An Update. 2000
NATO-CCMS Pilot Study on Disposal of Hazardous Wastes (Phases I and II). 1981
NATO-CCMS Pilot Study on Disposal of Hazardous Wastes: Metal Finishing Wastes. Project Leader: France. 1981
New membranes for reverse osmosis treatment of metal finishing effluents / 1973
New membranes for treating metal finishing effluents by reverse osmosis / 1976
No-Dump Bath Using Trivalent Chromium for the Passivation Process in the Galvanic Industry. Compendium on Low- and Non-Waste Technology. 1985
Overview of the Canadian surface finishing industry : status of the industry and measures for pollution control / 1987
Ozone treatment of cyanide-bearing plating waste / 1977
PBI reverse osmosis membrane for chromuim plating rinse water / 1978
Perfil de la Industria de Productos Metalicos Fabricados. Proyecto de Agenda de Sectores de la Oficina de Conformidad de la EPA (Profile of the Fabricated Metal Products Industry. EPA Office of Compliance Sector Notebook Project). 1995
Petitions to delist hazardous wastes : a guidance manual / 1985
Pilot plant optimization of phosphoric acid recovery process / 1975
Pollution prevention assessment for a manufacturer of combustion engine piston rings / 1995
Pollution prevention assessment for a manufacturer of locking devices / 1995
Pollution prevention for the metal finishing industry : a manual for pollution prevention technical assistance providers / 1997
Powder coatings technology update / 1989
Preliminary data summary of the metal finishing industry. 1994
Proceedings of the Workshop on Alternatives for Cadmium Electroplating in Metal Finishing : Oct. 4-6, 1977 at the National Bureau of Standards / 1979
Profile of the fabricated metal products industry. 1995
Promoting Improved Air Quality through Environmental Technology Verifications. 2002
Proposed best demonstrated available technology (BDAT). Volume 12, Background document for F006 (addendum) / 1989
Reclamation of metal values from metal-finishing waste treatment sludges / 1975
Recommended Methods of Reduction, Neutralization, Recovery, or Disposal of Hazardous Waste. Volume III. Disposal Process Descriptions. Ultimate Disposal, Incineration, and Pyrolysis Processes. 1973
Recommended Methods of Reduction, Neutralization, Recovery, or Disposal of Hazardous Waste. Volume VI. National Disposal Site Candidate Waste Stream Constituent Profile Reports. Mercury, Arsenic, Chromium, and Ca dmium Compounds. 1973
Recommended Methods of Reduction, Neutralization, Recovery, or Disposal of Hazardous Waste. Volume XIV. Summary of Waste Origins, Forms, and Quantities. 1973
Recovery of Metals from Metal Finishing Waste Stream Using Aluminum Displacement: Project Summary. 1995
Recovery Process for Complexed Copper-Bearing Rinse Waters: A State-of-the-Art Review of the Advantages and Disadvantages of Currently Available Technologies. 1984
Reducing California's Metal-Bearing Waste Streams. 1989
Regeneration of chromated aluminum deoxidizers : improved diaphragm fabrication and performance / 1977
Regeneration of chromated aluminum deoxidizers; phase I report / 1973
Region 5 Penalty Reduction was Unjustified and Undocumented. 2008
Removal and recovery of fluoborates and metal ions from electroplating wastewater / 1985
Removal of chromium from plating rinse water using activated carbon / 1975
Removal of heavy metals from industrial wastewaters using insoluble starch xanthate / 1978
Removal of toxic metals from metal finishing wastewater by solvent extraction / 1978
Report on Pollution of Interstate Waters of the Blackstone and Ten Mile Rivers, Massachusetts-Rhode Island. 1964
Report to Congress : wastes from the extraction and beneficiation of metallic ores, phosphate rock, asbestos, overburden from uranium mining, and oil shale. 1985
Reverse Osmosis in the Metal Finishing Industry. 1982
Reverse osmosis process. 1996
Rhode Island/Southeastern Massachusetts Jewelry, Electroplating and Metal Finishing Industries Environmental Assistance Project. 1981
Rolling Mills: An Industrial Waste Guide to Steel Rolling Mills. 1951
Second Conference on Advanced Pollution Control for the Metal Finishing Industry, presented at Orlando Hyatt House, Kissimmee, Fl., February 5-7, 1979 / 1979
Sorbents for fluoride, metal finishing, and petroleum sludge leachate contaminant control / 1978
Source Reduction Activities, Southeast Jewelry Platers Project. Preliminary Report, Phase 1. 1988
Source Reduction Opportunities in the Plating Industry. 1995
PREV 1 2 3 4 NEXT

Save, Print or Email Selected Records