Search Results for the EPA National Library Catalog

Items Found: 364
Showing: Items 1 - 50
Your Search: (SUBJECT=Pipes)


 
 
 
1 2 3 4 5 6 7 8 NEXT
Select Item Title Year Published
A compilation of cost information for conventional and advanced wastewater treatment plants and processes / 1967
A Demonstration of beneficial uses of warm water from condensers of electric generating plants / 1980
A general framework for corrosion control based on utility experience / 1997
A portable device for measuring wastewater flow in sewers / 1974
A Summary of leak detection methods for petroleum underground storage tank systems. 1990
Abatement of deposition and scour in sewers / 1977
Action of water on lead with special reference to the supply of drinking water summary of existing knowledge. 1934
Alternative onsite wastewater treatment and disposal systems on severely limited sites : project summary / 1987
Alternative Sewer Systems in the United States. 1984
American national standard for cement-mortar lining for ductile-iron pipe and fittings for water / 1985
American national standard for cement-mortar lining for ductile-iron pipe and fittings for water. 1995
American national standard for cement-mortar lining for ductile-iron pipe and fittings for water. 1990
American national standard for ductile-iron pipe, centrifugally cast, for water / 1996
American Recovery and Reinvestment Act site visit of combined sewer overflow detention facility city of Goshen, Indiana / 2013
Ammonia from chloramine decay : effects on distribution system nitrification / 2003
Analysis of motor vehicle fuel tank-related fires / 1988
Analytical Studies of Turbulent Friction in Annular Conduits (Task 12). 1968
ANSI/AWWA C223-13 : fabricated steel and stainless steel tapping sleeves / 2013
Arctic Foundations, Inc. freeze barrier technology : innovative technology evaluation report. 2004
Asbestos-in-Buildings Technical Bulletin: Abatement of Asbestos-Containing Pipe Insulation. 1986
Assessment and renewal of water distribution systems 2004
Assessment of current information on overland flow treatment of municipal wastewater / 1980
Assessment of existing and developing water main rehabilitation practices 1990
Assessment of non-uniform corrosion in copper piping 2008
Association of Microorganisms with Surfaces in Distribution Systems. 1991
At a Glance : American Recovery and Reinvestment Act Site Visit of Combined Sewer Overflow Detention Facility, City of Goshen, Indiana. 2013
AWWA standard for air-release, air-vacuum, and combination air valves for waterworks service. 1992
AWWA standard for asbestos-cement distribution pipe, 4 in. through 16 in. (100 mm through 400 mm), for water distribution systems. 1993
AWWA standard for ball valves 6 in. through 48 in. 1986
AWWA standard for ball valves, 6 in. through 48 in. (150 mm through 1200 mm). 1992
AWWA standard for bolted, sleeve-type couplings for plain-end pipes. 1992
AWWA standard for bolted, sleeve-type couplings for plain-end pipes. 1997
AWWA standard for cement-mortar lining of water pipelines in place : 4 in. (100 mm) and larger. 1996
AWWA standard for cement-mortar lining of water pipelines--4 in. (100mm) and larger-- in place. 1990
AWWA standard for cement-mortar protective lining and coating for steel water pipe : 4 in. and larger-- shop applied. 1989
AWWA standard for coal-tar protective coatings and linings for steel water pipelines : enamel and tape-- hot applied. 1997
AWWA standard for coal-tar protective coatings and linings for steel water pipelines, enamel and tape, hot applied. 1992
AWWA standard for coating the exterior of aboveground steel water pipelines and fittings. 1996
AWWA standard for coating the exterior of aboveground steel water pipelines and fittings. 1991
AWWA standard for cold-applied petrolatum tape and petroleum wax tape coatings for the exterior of special sections, connections, and fittings for buried or submerged steel water pipelines. 1995
AWWA standard for cold-applied petrolatum tape and petroleum wax tape coatings for the exterior of special sections, connections, and fittings for buried steel water pipelines. 1991
AWWA standard for cold-applied tape coatings for the exterior of special sections, connections, and fittings for steel water pipelines. 1991
AWWA standard for cold-applied tape coatings for the exterior of special sections, connections, and fittings for steel water pipelines. 1996
AWWA standard for disinfecting water mains. 1993
AWWA standard for disinfection of water treatment plants. 1997
AWWA standard for fiberglass pressure pipe. 1989
AWWA standard for fiberglass pressure pipe. 1996
AWWA standard for field welding of steel water pipe. 1997
AWWA standard for heat-shrinkable cross-linked polyolefin coatings for the exterior of special sections, connections, and fittings for steel water pipelines. 1989
AWWA standard for installation of asbestos-cement pressure pipe. 1996
1 2 3 4 5 6 7 8 NEXT

Save, Print or Email Selected Records