Jump to main content
US EPA
United States Environmental Protection Agency
Search
Search
Environmental Topics
Laws & Regulations
About EPA
Menu
Environmental Topics
Laws & Regulations
About EPA
Related Topics:
EPA National Library Network
Contact Us
Search Results for the EPA National Library Catalog
Items Found: 36
Showing: Items 1 - 36
Your Search: (SUBJECT=Molding)
Sort Results:
Publication dates (newest-oldest)
Publication dates (oldest-newest)
Title
Choose a Library:
(CTRL-CLICK for multiple libraries)
Search all libraries
Capital Group(All DC-area libraries)
AWBERC Library/Cincinnati,OH
CCTE/GLTED Library/Duluth,MN
CEMM/ACESD Library/Narragansett,RI
CEMM/EPD Library/Athens,GA
CEMM/GEMMD Library/Gulf Breeze,FL
CPHEA/PESD Library/Corvallis,OR
Env Science Center Library/Ft Meade,MD
Headquarters Library/Washington,DC
Law Library/Washington,DC
NRMRL/GWERD Library/Ada,OK
NVFEL Library/Ann Arbor, MI
OCSPP Chemical Library/Washington,DC
Region 1 Library/Boston,MA
Region 2 Library/New York,NY
Region 3 Library/Philadelphia, PA
Region 4 Library/Atlanta,GA
Region 5 Library/Chicago,IL
Region 6 Library/Dallas,TX
Region 8 Technical Library/Denver,CO
Region 9 Library/San Francisco,CA
Region 10 Library/Seattle,WA
Research Triangle Park Library/RTP, NC
Choose a Collection:
(CTRL-CLICK for multiple collections)
Search all collections
books
documents
journals
reference
audiovisual
ebooks
Select Item
Title
Year Published
1
A rapid-set cement suitable as a molding sand binder for small ferrous castings /
1980
2
Addendum to assessment of styrene emission controls for FRP/C and boat building industries /
1996
3
Air pollution aspects of the iron foundry industry : February 1971 /
1971
4
Air Pollution Aspects of the Iron Foundry Industry.
1971
5
Alternative control techniques document : for PM-10 emissions from ferrous foundries.
1992
6
Analytical Techniques for Measuring Hydrocarbon Emissions from the Manufacture of Fiberglass-Reinforced Plastics.
1998
7
Assesment of Styrene Emission Controls for FRP/C and Boat Building Industries (on Diskette).
1996
8
Assessment of Styrene Emission Control Technologies for the FRP and Boat Building Industries.
1996
9
Assessment of styrene emission controls for FRP/C and boat building industries /
1996
10
Availability of workplace noise control technology for selected machines {Microfiche}
1982
11
Chemical technology and economics in environmental perspectives. Task V Investigation of alternatives for selected aerosol propellants and related applications of chlorofluorocarbons.
1977
12
Companion Document for the Conference on Waste Reduction for Industrial Air Toxic Emissions. Held in Greensboro, North Carolina on April 24-25, 1989.
1989
13
Conversion of polyester/cotton industrial wastes to higher value products : final report
1986
14
Development document for effluent limitations guidelines and new source performance standards for the fabricated and reclaimed rubber segment of the rubber processing point source category /
1974
15
Development document for effluent limitations guidelines and standards for the plastics molding and forming point source category.
1984
16
Development document for effluent limitations guidelines and standards for the plastics molding and forming point source category.
1985
17
Development document for effluent limitations guidelines and standards for the plastics molding and forming point source category.
1984
18
Economic impact analysis of effluent limitations and standards for the plastics molding and forming industry /
1984
19
Economic impact analysis of proposed effluent limitations and standards for the plastics molding and forming industry.
1984
20
EPA Office of Compliance Sector Notebook Project : profile of the metal casting industry.
1997
21
Evaluation of Pollution Prevention Techniques to Reduce Styrene Emissions from Open Contact Molding Processes. Volume 1. Final Report.
1997
22
Evaluation of Pollution Prevention Techniques to Reduce Styrene Emissions from Open Contact Molding Processes. Volume 2. Appendices.
1997
23
Evaluation of styrene emissions from a shower stall/bathtub manufacturing facility /
1996
24
Final Effluent Limitations Guidelines and Standards: Rulemaking for the Metal Molding and Casting Point Source Category.
1986
25
Final Effluent Limitations Guidelines and Standards: Rulemaking for the Plastics Molding and Forming Point Source Category.
1985
26
FRP Model (Version 1.0) for Estimating Styrene Emissions from Fiber-Reinforced Plastics Fabrication Processes (on Diskette).
1998
27
Fugitive emissions from iron foundries /
1979
28
Metalcasters of Minnesota Thermal Sand Processing Feasibility Study.
1990
29
Profile of the metal casting industry.
1997
30
Training course for Mexican multi-media inspectors : reference manual for industrial processes /
0
31
Training course for Mexican multi-media inspectors : student manual /
0
32
Waste minimization assessment for a manufacturer of custom molded plastic products /
1992
33
Waste minimization assessment for a manufacturer of felt tip markers, stamp pads, and rubber cement /
1994
34
Waste minimization assessment for a manufacturer of injection-molded car and truck mirrors /
1992
35
Waste reduction activities and options for a manufacturer of orthopedic implants /
1992
36
Waste reduction activities and options for a manufacturer of plastic containers by injection molding /
1992
Save, Print or Email Selected Records
Select Records
Selected (this page only)
Selected (across pages)
All (this page only)
All (all pages - 500 item maximum)
Select Format
Text (Brief Information)
Text (Full Information)
Endnote (Endnote Import)
ASCII delimited for EXCEL
Email Address:
(if applicable)