Search Results for the EPA National Library Catalog

Items Found: 117

Showing: Items 1 - 50

Your Search: (SUBJECT=Alloys.)


1 2 3 NEXT
Select Item Title Year Published
Adaptation of the Gold Amalgamation Sampling and Analytical Procedure for the Analysis of Mercury in Stack Gases to High SO2 Environments Observed in Smelters. 1972
Air pollution aspects of beryllium and its compounds / 1970
Air pollution effects on catastrophic failure of metals / 1974
Air quality criteria for nitrogen oxides. 1971
Air quality criteria for nitrogen oxides. 1971
Aluminum, Copper, and Nonferrous Metals Forming and Metal Powders Pretreatment Standards: A Guidance Manual. 1989
An analysis of scrap futures markets for stimulating resource recovery / 1978
Annual book of ASTM standards 2003. Section 2, Nonferrous metal products. 2003
Assessment of Industrial Hazardous Waste Practices in the Metal Smelting and Refining Industry. Volume III. Ferrous Smelting and Refining. 1977
Automotive gas turbine economic analysis--investment cast turbine wheel supplement / 1973
Background information for standards of performance : electric submerged arc furnaces for production of ferroalloys / 1974
Background information for standards of performance : electric submerged arc furnaces for production of ferroalloys / 1976
Base line forecasts of resource recovery, 1972 to 1990 : final report / 1975
Best demonstrated available technology (BDAT) background document for chromium wastes D007 and U032 : final. 1990
Best demonstrated available technology (BDAT) background document for vanadium-containing wastes (P119 and P120) : final. 1990
Carbon and alloy steels / 1996
Casting properties of metals and alloys. 1963
Chesapeake Bay Atmospheric Deposition Study Phase 2: July 1990-December 1991. Final Report. 1994
Compilation of Environmental Assessment Data, February 1978-March 1979. Volume II. Studies 8 and 9. 1980
Creep-Rupture Tests of Internally Pressurized Haynes Alloy No. 25 Tubes. 1971
Defects and defect clusters in b.c.c. metals and their alloys; proceedings. 1973
Deformation Studies of Superlattice Structures. Final Report, March 1, 1963-August 31, 1970. 1971
Determination of Biaxial Creep Strength of T-111 Tantalum Alloy. 1971
Determination of Mercury in stack Gases of High SO2 Content by the Gold Amalgamation Technique. 1973
Development and Evaluation of an Analytical Method for the Determination of Total Atmospheric Mercury. 1972
Development document for effluent limitations guidelines and new source performance standards for the hot forming & cold finishing segment of the iron and steel manufacturing point source category / 1975
Development document for interim final effluent limitations guide-lines and proposed new source performance standards for the electroytic ferro-alloys segment of the ferroalloys manufacturing point source category. 1975
Development of a Molten Carbonate Process for Removal of Sulfur Dioxide from Power Plant Stack Gases. 1968
Development of field applied DDT, 1974
Development of the Gold Amalgamation Sampling and Analytical Procedure for Investigation of Mercury in Stack Gases. 1972
Drinking water criteria document for antimony. 1992
Drinking water health advisory for antimony / 1991
Economic Analysis of Effluent Guidelines Ferroalloys Industry. 1974
Economic Analysis of Effluent Guidelines. The Nonferrous Metals Industry (Aluminum). 1974
Economic Impact Analysis (EIA) for the manganese ferroalloys RTR. 2015
Effect of Heat Treatment and Impurities on the Current Density of Transition Metal Superconductors. 1971
Effects of gaseous pollutants on materials : a chamber study / 1976
Effects of Sheltering and Orientation on the Atmospheric Corrosion of Structural Metals. 1987
Electrical Resistivity and Magnetic Susceptibilities of Amorphous Cr-Ni-Pt-P Alloys. AEC Research and Development Report No. 26. 1971
Emissions testing at Culp Aluminum Alloys : test report / 1999
Engineering and cost study of the ferroalloy industry / 1974
Ferroalloy industry particulate emissions : source category report / 1987
Ferrous Metals Recovery at Recovery 1, New Orleans: Performance of the Modified System. Test No. 4.05 and Test No. 4.09, Recovery 1, New Orleans. 1981
Field Exposure Study for Determining the Effects of Acid Deposition on the Corrosion and Deterioration of Materials: Description of Program and Preliminary Results. 1985
Handbook of aluminum / 2003
High-temperature erosion-corrosion of alloys : final report / 1980
Identification of Opportunities for Increased Recycling of Ferrous Solid Waste. 1972
Impacts of Material Substitution in Automobile Manufacture on Resource Recovery - Volume 1: Results and Summary. 1976
Impacts of material substitution in automobile manufacture on resource recovery / 1976
Improvement of Magnetically Separated Ferrous Concentrate by Shredding: A Performance Test. Test No. 4.07, Recovery 1, New Orleans. 1981
1 2 3 NEXT

Save, Print or Email Selected Records