||Final summary report on evaluation of the water-based coating method (ATD-FID) /
Callahan, Patrick J. ;
Holdren, M. W. ;
Chace, P. A. ;
Keigley, G. W.
||Battelle Memorial Inst., Columbus, OH.;Environmental Protection Agency, Research Triangle Park, NC. Office of Air Quality Planning and Standards.
|| U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards,
Surface coating ;
Gas chromatography ;
Interlaboratory comparions ;
Chemical analysis ;
Chemical composition ;
Flame ionization ;
Laboratory tests ;
Quality assurance ;
Air pollution abatement ;
Water based products ;
Water based paints ;
Volatile organic compounds ;
FID(Flame Ionization Detector)
||Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy.
||208 pages : illustrations ; 28 cm
||To reduce the formation of ozone, the Environmental Protection Agency (EPA) regulates volatile organic compounds (VOC) from a number of facilities and materials. The current EPA regulations require the use of EPA Method 24 to determine the VOC content of coatings and inks. Method 24 indirectly determines the VOC content of a coating by measuring the coatings volatile content using the American Society for Testing and Materials (ASTM) method D 2369, water content by ASTM methods D 3792 or D 4017 and exempt compounds content by ASTM D 4457. EPA developed a method for measuring the VOC content of water-based coatings directly rather than indirectly as in EPA Method 24. In this method, a Perkin-Elmer Model ATD-400 automated tube desorber is used to thermally desorb the volatiles from a weighted sample of coating, and a flame ionizaion detector on a gas chromatograph (GC) is used to estimate the total amount of VOCs in the volatilized material. The purpose of this project was to conduct an interlaboratory study to evaluate the draft water-based coating method. A total of six laboratories participated in the interlaboratory study. Each of the laboratories was required to analyze four different water-based coatings following the procedure described in the draft method.
||EPA project officer: Kathy Weant. Performed by Battelle Memorial Institute for the U.S. Environmental Protection Agency, Office of Air Quality Planning and Standards, Emissions Monitoring and Analysis Division. "September 29, 1999." "September 1999"--Cover. Includes bibliographical references. "EPA-454/R-99-040"--Cover. Microfiche.
||Research Triangle Park, N.C. :
||Sponsored by Environmental Protection Agency, Research Triangle Park, NC. Office of Air Quality Planning and Standards.
||Product reproduced from digital image. Order this product from NTIS by: phone at 1-800-553-NTIS (U.S. customers); (703)605-6000 (other countries); fax at (703)605-6900; and email at firstname.lastname@example.org. NTIS is located at 5285 Port Royal Road, Springfield, VA, 22161, USA.
|Corporate Au Added Ent
||United States. Environmental Protection Agency. Office of Air Quality Planning and Standards. ; Battelle Memorial Institute.
||Evaluation of the water based coating method (ATD-FID) round robin study
|PUB Date Free Form
||PC A20/MF A04
|OCLC Time Stamp
|OCLC Rec Leader
||01560nam 2200325Ka 45020