In Version 3, the HELP model has been greatly enhanced beyond Version 2. The number of layers that can be modeled has been increased. The default soil/material texture list has been expanded to contain additional waste materials, geomembranes, geosynthetic drainage nets, and compacted soils. The model also permits the use of a user-built library of soil textures. Computations of leachate recirculation and groundwater drainage into the landfill have been added. Moreover, HELP Version 3 accounts for leakage through geomembranes due to manufacturing defects (pinholes) and installation defects (punctures, tears and seaming flaws) and by vapor disfusion through the liner based on the equations compiled by Giroud et al. (1989, 1992). The estimation of runoff from the surface of the landfill has been improved to account for large landfill surface slopes and slope lengths. The snowmelt model has been replaced with an energy-based model; the Priestly-Taylor potential evapotranspiration model has been replaced with a Penman method, incorporation wind and humidity effects as well as long wave radiation losses (heat loss at night). A frozen soil model has been added to improve infiltration and runoff predictions in cold regions. The unsaturated vertical drainage model has also been improved to aid in storage computations. Input and editing have been further simplified with interactive, full-screen, menu-driven input techniques. The HELP model requires daily climatologic data, soil characteristics, and design specifications to perform the analysis. Daily rainfall data may be input by the user, generated stochastically, or taken from the model's historical data base. The model contains parameters for generating synthetic precipitation for 139 U.S. cities. The historical data base contains five years of daily precipitation data for 102 U.S. cities. Daily temperature and solar radiation data are generated stochastically or may be input by the user. Necessary soil data include
porosity, field capacity, wilting point, saturated hydraulic conductivity, and Soil Conservation Service (SCS) runoff curve number for antecedent types for use when measurements or site-specific estimates are not available. Design specifications include such things as the slope and maximum drainage layers, layer thicknesses, leachate recirculation procedure, surface cover characteristics, and information on any geomembranes.
||The software is on two 3 1/2 inch DOS diskettes, 1.44M high density. Documentation included; may be ordered separately as PB98-104474 and PB98-104482. Order this product from NTIS by: phone at 1-800-553-NTIS (U.S. customers); (703)605-6000 (other countries); fax at (703)321-8547; and email at email@example.com. NTIS is located at 5285 Port Royal Road, Springfield, VA, 22161, USA.