||Technology evaluation report: SITE program demonstration test : Soliditech, Inc., solidification/stabilization process /
Grube, Walter E.
||PRC Environmental Management, Inc., Chicago, IL.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
|| Risk Reduction Engineering Laboratory, Office of Research and Development, U.S. Environmental Protection Agency,
Stabilizing agents--Testing. ;
Waste disposal in the ground--Environmental aspects--New Jersey. ;
Hazardous waste sites--New Jersey.
Waste treatment ;
Hazardous materials ;
Performance evaluation ;
Data processing ;
Quality assurance ;
Quality control ;
Field tests ;
Physical tests ;
Chemical tests ;
Experimental design ;
Technology utilization ;
Superfund Innovative Technology Evaluation Program ;
Soliditech process ;
Polychlorinated biphenyls ;
||Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy.
||675 pages : illustrations, maps ; 28 cm.
||The primary objective of the Soliditech, Inc. solidification/stabilization demonstration was to develop reliable performance and cost information. The demonstration took place at the Imperial Oil Company/Champion Chemical Company Superfund site in Morganville, New Jersey. Contamination at this site includes PCBs, various metals, and oil and grease. The Soliditech process mixes the waste material with Urrichem, a proprietary reagent; proprietary additives; pozzolanic materials or cement (cement was used for the demonstration); and water, in an open-topped concrete mixer. The technical criteria used to evaluate the effectiveness of the Soliditech process were contaminant mobility, based upon leaching and permeability tests; and the structural integrity of the solidified material, based upon physical and morphological tests. The treated wastes had significant structural integrity, low permeability, and higher bulk density than the untreated wastes. pH values of the treated wastes were highly influenced by alkalinity of the portland cement added during treatment. Documentation will consist of two reports. This one is the Application Analysis Report that provides an interpretation of the data, and discusses the potential applicability of the technology.
||"Prepared for the EPA's Superfund Innovative Technology Evaluation (SITE) Program by ... PRC Environmental Management, Inc. ... and ... Radian Corporation under contract no. 68-03-3483"--Vol. 1, p. xv. Shipping list no.: 90-174-P. "February 1990." Includes bibliographical references (pages 119-120)-Vol. 1. "EPA/540/5-89/005b." Microfiche.
||Cincinnati, OH :
||See also Volume 1, PB90-191750. Portions of this document are not fully legible. Sponsored by Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
|Corporate Au Added Ent
||Risk Reduction Engineering Laboratory (U.S.) ; PRC Environmental Management, Inc. ; Radian Corporation.
||SITE program demonstration test: Soliditech, Inc. solidification/stabilization process.
|PUB Date Free Form
|Series Title Traced
||Technology evaluation report
||PC A99/MF A04
|OCLC Time Stamp
|OCLC Rec Leader
||01765nam 2200361Ka 45020