Full Record Display for the EPA National Library Catalog

RECORD NUMBER: 4 OF 22

OLS Field Name OLS Field Data
Main Title Bench-Scale Process Evaluation of Reburning and Sorbent Injection for In-Furnace NOx/SOx Reduction.
Author Greene, S. B. ; Chen, S. L. ; Clark, W. D. ; Heap, M. P. ; Pershing, D. W. ;
CORP Author Energy and Environmental Research Corp., Irvine, CA.;Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab.
Year Published 1985
Report Number EPA-68-02-3925; EPA/600/7-85/012;
Stock Number PB85-185890
Additional Subjects Air pollution control ; Furnaces ; Nitrogen oxides ; Sulfur oxides ; Injection ; Combustion products ; Industrial wastes ; Sorbents ; Calcium oxides ; Reburning processes ; Limestone injection
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB85-185890 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 06/21/1988
Collation 256p
Abstract The report gives results of combining reburning with the injection of calcium-based sorbents to investigate the potential for combined NOx and SOx reduction. Reburning, applied to pulverized-coal-fired utility boilers, involves injecting a secondary fuel above the main firing zone to produce a reducing zone where NOx is converted to molecular nitrogen. Overfire air is added above the reburn reducing zone to complete the combustion. Bench-scale evaluations of reburning, carried out in a plug-flow furnace at 23 kWt, have indicated that NOx reductions of up to 70% can be achieved depending on a number of process variables, dominant of which are the initial NOx level that is to be reduced, the reburning fuel type (pulverized coal type or natural gas), and the stoichiometry, residence time, and temperature in the reducing zone. Combining the two processes indicates that the optimum sorbent injection location in a reburning system is with the burnout air because of the increased reactivity of the calcined sorbent. Dolomite consistently produces higher capture than calcitic limestone for a wide spectrum of combustion conditions. It is possible to relate sulfur capture directly to sorbent reactivity as characterized by surface area after calcination. Sulfur capture in a coal-fired system is similar to that obtained with doped propane. Sulfur capture is most dependent on injection temperature.
NTIS Title Notes Final rept. Oct 83-Oct 84.
PUB Date Free Form Mar 85
Category Codes 13B; 68A
NTIS Prices PC A12/MF A01
Primary Description 600/13
Document Type NT
Cataloging Source NTIS/MT
Control Number 514427158
Origin NTIS
Type CAT