Full Record Display for the EPA National Library Catalog

RECORD NUMBER: 19 OF 20

Main Title Testing of wall-fired furnaces to reduce emissions of NOx and SOx /
Author Case, P. L. ; Ho, L. ; Clark, W. D. ; Kau, E. ; Pershing, D. W.
Other Authors
Author Title of a Work
Case, P.
CORP Author Energy and Environmental Research Corp., Irvine, CA.;Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab.
Publisher U.S. Environmental Protection Agency, Air and Energy Engineering Research Laboratory,
Year Published 1985
Report Number EPA/600/7-85/026A; EPA-68-02-3921
Stock Number PB85-224632
Subjects Coal-fired furnaces--Testing ; Sulfur dioxide--Measurement ; Sulphur dioxide--Measurement
Additional Subjects Burners ; Air pollution control ; Nitrogen oxides ; Sulfur oxides ; Boilers ; Design criteria ; Performance evaluation ; Calcium carbonates ; Combustion products ; Industrial wastes ; Natural gas ; Experimental design ; Pilot plants ; Calcium oxides ; Propane ; Lignite ; Dolomite ; Limestone injection multistage burners ; Low nitrogen oxides concentration firing systems ; Boiler simulator furnaces ; Distributed mixing burners ; Coal water slurries ; Fuel-air ratio
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB85-224632 Some EPA libraries have a fiche copy filed under the call number shown. 07/26/2022
Collation 336 pages ; 28 cm
Abstract The report gives results of a study to clarify the processes that control sulfur capture by dry sorbents injected directly into a pulverized-coal-fired system, and to develop methods for generalizing data from one test furnace to another and from test facilities to fired application. Most experiments were conducted in a 1 million Btu/hr down-fired furnace to determine the effects of: fuel type, sorbent type, injection location, peak flame temperature, SO2 concentration, and burner zone stoichiometry. Conclusions of the study include: (1) the concentration of SO2 in the natural-gas-fired tests had a slight effect on sulfur capture, increasing capture at Ca/S = 2 from 26% at 500 ppm to 40% at 3500 ppm SO2; (2) the concentration of mineral matter in the system had a very strong impact on capture at all SO2 concentrations and Ca/S ratios tested; (3) injecting the sorbent downstream from the main flame resulted in improved utilization in coal flames; and (4) the effect of sorbent type on capture with a given fuel was dependent on the firing conditions--including sorbent injection location and thermal conditions (the hydrated limes seemed to be most sensitive to thermal conditions and the Vicron limestone least sensitive). Dolomite gave the highest capture with all of the fuels tested.
Notes Caption title. "June 1985." "EPA/600/7-85/026A." Microfiche.
Place Published Research Triangle Park, NC :
Supplementary Notes See also PB85-224640.
Corporate Au Added Ent Air and Energy Engineering Research Laboratory.
PUB Date Free Form 1985.
NTIS Prices PC A15/MF A01
BIB Level m
Cataloging Source OCLC/T
OCLC Time Stamp 20011217124500
Language eng
Origin NTIS
Type MERGE
OCLC Rec Leader 01048nam 2200277Ka 45020