| Main Title |
Development and Preliminary Design of a Sorbent-Oil Recovery System. |
| Author |
Mille, E. ;
Stephen, L. ;
Rickli, J. ;
|
| CORP Author |
Hydronautics, Inc., Laurel, Md. |
| Year Published |
1973 |
| Report Number |
EPA-68-01-0066; EPA-15080-HEV; 11071,,; R2-73-156 |
| Stock Number |
PB-221 497 |
| Additional Subjects |
( Water pollution ;
Oils) ;
( Oils ;
Absorption) ;
Cellular plastics ;
Materials recovery ;
Polyurethane resins ;
Foam ;
Design ;
Model tests ;
Performance evaluation ;
Cost estimates ;
Absorbers(Materials) ;
Crude oil ;
Bunker oils ;
Efficiency ;
Separation ;
Oil pollution ;
Oil pollution removal ;
Oil spills ;
Shipborne
|
| Holdings |
| Library |
Call Number |
Additional Info |
Location |
Last
Modified |
Checkout
Status |
| NTIS |
PB-221 497 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
| Collation |
199p |
| Abstract |
A development program was completed and preliminary designs were prepared for 3000 gallon/hour protected water and 10,000 gallon/hour unprotected water Sorbent Oil Recovery Systems. The program showed that a continuous sorbent-oil recovery system is feasible using 30 or 80 PPI polyurethane sorbent chips. In one pass about 90 percent of the oil in a 1.5 mm slick can be recovered. The water content of the Recovered Fluid is less than 10 percent. The preliminary designs are presented with detailed descriptions of the system components, operating procedures, and costs. (Modified author abstract) |
| Availability Notes |
Paper copy available from GPO $2.60 as EP1.23/2:73-156. |
| Highlights Notes |
Describes the development of and presents preliminary designs for a towed or self-propelled oil spill recovery system using foam chips. |
| NTIS Title Notes |
Environmental protection technology series. |
| PUB Date Free Form |
Jan 73, |
| Category Codes |
13B; 68D# |
| NTIS Prices |
PC-GPO/MF A01-NTIS |
| Document Type |
NT |
| Cataloging Source |
NTIS/MT |
| Control Number |
326564016 |
| Origin |
NTIS |
| Type |
CAT |
