| Main Title |
Sampling oil-water mixtures at OHMSETT / |
| Author |
Borst, Michael.
|
| CORP Author |
Mason and Hanger-Silas Mason Co., Inc., Leonardo, NJ.;Environmental Protection Agency, Cincinnati, OH. Hazardous Waste Engineering Research Lab. |
| Publisher |
U.S. Environmental Protection Agency, Hazardous Waste Engineering Research Laboratory, |
| Year Published |
1987 |
| Report Number |
EPA 600-2-87-073; EPA-68-03-3056 |
| Stock Number |
PB88-102892 |
| OCLC Number |
841795465 |
| Subjects |
Emulsions--Sampling ;
Water--Sampling
|
| Additional Subjects |
Sampling ;
Oils ;
Water ;
Cycloalkane hydrocarbons ;
Oil recovery ;
Fluid flow ;
Sandy Hook Bay ;
Oil and hazardous materials simulated environmental test tank ;
Hazardous wastes ;
Oil spills ;
Stratified sampling ;
Leonards(New Jersey)
|
| Internet Access |
|
| Holdings |
| Library |
Call Number |
Additional Info |
Location |
Last
Modified |
Checkout
Status |
| ELBD ARCHIVE |
EPA 600-2-87-073 |
Received from HQ |
AWBERC Library/Cincinnati,OH |
10/04/2023 |
| NTIS |
PB88-102892 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
| Collation |
vi, 31 leaves : ill., charts ; 28 cm. |
| Abstract |
The report describes procedures developed at the Oil and Hazardous Material Simulated Environmental Test Tank (OHMSETT) for sampling oil and water mixtures. Two procedures for sampling in containers are discussed: grab and stratified sampling. Both of these techniques require stripping free-standing water from the container bottom. The grab sample technique requires that the remaining fluids be thoroughly mixed before immersing a bottle through the resulting homogeneous emulsion. The stratified sampling procedure uses a sample thief to capture a segmented cross-section of the remaining fluids. Two procedures for sampling flowing fluids were also tested. The two sampling tubes tested were installed immediately downstream of a series of static mixers and a centrifugal pump. The sampling ports were a simple slotted tube and a pilot-shaped tube. |
| Notes |
"September 1987."--Title page. "Project Officer: Richard A. Griffiths."--Title page. Bibliography: leaf 21. |
| Contents Notes |
This report describes procedures developed at OHMSETT for sampling oil and water mixtures. Two procedures for sampling in containers are discussed: grab and stratified sampling. Both of these techniques require stripping free-standing water from the container bottom. The grab sample technique requires that the remaining fluids be thoroughly mixed before immersing a bottle through the resulting homegenous emulsion. The stratified sampling procedure uses a sample thief to capture a segmented cross-section of the remaining fluids. Two procedures for sampling flowing fluids were tested. The two sampling tubes tested were installed immediately downstream of a series of static mixers and a centrifugal pump. The sampling ports were a simple slotted tube and a pilot-shaped tube. |
| Place Published |
Cincinnati, OH |
| Supplementary Notes |
Sponsored by Environmental Protection Agency, Cincinnati, OH. Hazardous Waste Engineering Research Lab. |
| Corporate Au Added Ent |
Hazardous Waste Engineering Research Laboratory. |
| NTIS Title Notes |
Final rept.. |
| PUB Date Free Form |
1988 |
| Category Codes |
99A; 48A; 46B; 68C |
| NTIS Prices |
PC A03/MF A01 |
| Primary Description |
600/12 |
| BIB Level |
m |
| Cataloging Source |
OCLC/T |
| Control Number |
735119660 |
| OCLC Time Stamp |
20150428105612 |
| Language |
eng |
| Origin |
OCLC |
| Type |
MERGE |
| OCLC Rec Leader |
01804cam 2200289Ia 45020 |
