Main Title |
Rotalyt-Alutop (Process for Aluminum Plating). Compendium on Low- and Non-Waste Technology. |
CORP Author |
Economic Commission for Europe (UN), Geneva (Switzerland). Working Party on Low and Non-Waste Technology and Re-Utilization and Recycling of Wastes.;Environmental Protection Agency, Washington, DC. |
Publisher |
6 May 85 |
Year Published |
1985 |
Stock Number |
PB95-233888 |
Additional Subjects |
Electroplating ;
Aluminum ;
Water pollution control ;
Waste waters ;
Industrial wastes ;
Corrosion ;
Metals ;
Technology transfer ;
Utilization ;
Metal treating ;
Rotalyt-Alutop
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
NTIS |
PB95-233888 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
8p |
Abstract |
The Rotalyt-Alutop process for aluminum plating is based on the chemo- mechanical plating of pieces in a medium containing an impact body, and metal particles and catalysts, using relative movement. The pieces are loaded into a perforated drum, and lowered into a plating bath where glass balls are added as the impact body and the aluminum flakes are added. The drum passes through a separation tank where the glass balls are separated for reuse, to a centrifuge unit, and to an unloading station for drying. The cathodic corrosion protection properties are considerably improved by the use of zinc containing aluminum alloys, or preplating to add a zinc/tin layer. |
Supplementary Notes |
Portions of this document are not fully legible. Sponsored by Environmental Protection Agency, Washington, DC. |
Category Codes |
68D; 68; 94G; 71E; 71L; 71N |
NTIS Prices |
PC A02/MF A01 |
Primary Description |
100/00 |
Document Type |
NT |
Cataloging Source |
NTIS/MT |
Control Number |
521406410 |
Origin |
NTIS |
Type |
CAT |