Main Title |
Technique for Controllable Vapor-Phase Deposition of 1-Nitro(14C)pyrene and Other Polycyclic Aromatic Hydrocarbons onto Environmental Particulate Matter. |
Author |
Lucas, S. V. ;
Lee, K. W. ;
Melton, C. W. ;
Lewtas, J. ;
Ball, L. M. ;
|
CORP Author |
Battelle Columbus Labs., OH. ;North Carolina Univ. at Chapel Hill. Dept. of Environmental Sciences and Engineering.;Health Effects Research Lab., Research Triangle Park, NC. |
Publisher |
c1991 |
Year Published |
1991 |
Report Number |
EPA-R-811817; EPA/600/J-91/042; |
Stock Number |
PB91-182212 |
Additional Subjects |
Air pollution detection ;
Tracer studies ;
Aerosol generators ;
Aromatic polycyclic hydrocarbons ;
Diesel engine exhaust ;
Experimental design ;
Gas chromatography ;
Carbon 14 ;
Exhaust emissions ;
Benzopyrene ;
Chemical analysis ;
Toxicology ;
Coatings ;
Substrates ;
Design criteria ;
Particles ;
Mass spectroscopy ;
Urban area ;
Biological effects ;
Metabolism ;
Reprints ;
Pyrene/nitro ;
Fluoranthene/nitro
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
NTIS |
PB91-182212 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
16p |
Abstract |
To produce environmental particles fortified with a polycyclic aromatic hydrocarbon (PAH) for toxicology studies, an experimental apparatus was devised for deposition of the desired chemical species onto particles in a controlled and reproducible manner. The technique utilized consists of dispersion of the particles on a gaseous stream at a controlled rate, thermal vaporization of a solution of PAH, delivery of the vaporized PAH into the aerosol of particles at a controlled rate, subsequent condensation of the PAH onto the particles, and final recovery of the coated particles. The effectiveness of this approach was demonstrated by vapor-coating a 14C-labeled PAH (1-nitro(14C)-pyrene) onto diesel engine exhaust particles that had previously been collected by tunnel dilution sampling techniques. Using the 14C label as a tracer, the coated particles were characterized with respect to degree of coating, integrity of particle structure and absence of chemical decomposition of the coating substrate. The study demonstrates that the described method provides a controllable means for depositing a substance uniformly and with a high coating efficiency onto aerosolized particles. The technique was also used to vapor-coat benzo(a)pyrene onto diesel engine exhaust and urban ambient air particulate matter, and 2-nitrofluoranthene onto urban ambient air particulate matter. Coating efficiencies of about 400 micrograms/g particulate matter were routinely obtained on a single coating run, and up to 1200 micrograms/g (1200 ppm) were achieved after a second pass through the process. The coated particles were subsequently utilized in biological fate, distribution and metabolism studies. |
Supplementary Notes |
Pub. in Aerosol Science and Technology, v14 n2 p210-223 Feb 91. Prepared in cooperation with North Carolina Univ. at Chapel Hill. Dept. of Environmental Sciences and Engineering. Sponsored by Health Effects Research Lab., Research Triangle Park, NC. |
NTIS Title Notes |
Journal article. |
Title Annotations |
Reprint: Technique for Controllable Vapor-Phase Deposition of 1-Nitro(14C)pyrene and Other Polycyclic Aromatic Hydrocarbons onto Environmental Particulate Matter. |
Category Codes |
68A; 68G; 99A; 57U; 57Y |
NTIS Prices |
PC A03/MF A01 |
Primary Description |
600/10 |
Document Type |
NT |
Cataloging Source |
NTIS/MT |
Control Number |
117926977 |
Origin |
NTIS |
Type |
CAT |