||Lignosulfonate-Modified Calcium Hydroxide for Sulfur Dioxide Control.
Kirchgessner, D. A. ;
Lorrain, J. M. ;
||Acurex Corp., Research Triangle Park, NC.;Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab.
Sulfur dioxide ;
Calcium hydroxides ;
Air pollution control ;
Nitrogen oxides ;
Particle size ;
LIMB process ;
||Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy.
||The article discusses the use of lignosulfonate-modified calcium hydroxide Ca(OH)2 for sulfur dioxide (SO2) control. The limestone injection multistage burner (LIMB) process is currently being developed at the U.S. EPA as a low cost retrofittable technology for controlling oxides of sulfur and nitrogen from coal-burning utility boilers. The most effective commercial calcium-based sorbent for this process is Ca(OH)2, with SO2 removals of about 50%. Additions of calcium lignosulfonate up to 1.5 mass % of the dry product, introduced with the water of hydration, increase the SO2 capture of the resulting Ca(OH)2 to 60%. This is achieved through particle size reduction in the modified hydroxides. The principal mechanism of size reduction appears to be deagglomeration of the Ca(OH)2 crystals; a secondary benefit is derived from crystal size reduction. (Copyright (c) 1987 by the American Chemical Society.)
||Pub. in Industrial and Engineering Chemistry Research, v26 n11 p2397-2400 1987. Sponsored by Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab.
|NTIS Title Notes
||Reprint: Lignosulfonate-Modified Calcium Hydroxide for Sulfur Dioxide Control.
|PUB Date Free Form
||PC A02/MF A01