Full Record Display for the EPA National Library Catalog


Main Title Literature review: Heat transfer through two-phase insulation systems consisting of powders in a continuous gas phase.
Author Yarbrough, D. W. ;
CORP Author Oak Ridge National Lab., TN.;Department of Energy, Washington, DC.
Publisher Dec 92
Year Published 1992
Report Number EPA-600/R-92-203 ;ORNL/M-2426; AC05-84OR21400;
Stock Number DE93014387
Additional Subjects Powders ; Thermal Insulation ; Bibliographies ; Heat Flux ; Heat Transfer ; Particle Size ; Reviews ; Thermal Conductivity ; Two-Phase Flow ; EDB/320106
Library Call Number Additional Info Location Last
NTIS  DE93014387 Some EPA libraries have a fiche copy filed under the call number shown. 07/26/2022
Collation 34p
Abstract This review of the literature on heat flow through powders was motivated by the use of fine powder systems to produce high thermal resistivities (thermal resistance per unit thickness). The term ''superinsulations'' has been used to describe this type of material, which has thermal resistivities in excess of 20 ft(sup 2)-h-F/Btu (3.52 K-m(sup 2/)W) per inch (2.54 cm) of insulation thickness. The present report is concerned with superinsulations obtained using evacuated powders. The literature review has shown that the calculation of heat flow through gas-powder systems is highly developed. One major weakness in the calculational procedures is the absence of structural features for the powders, which are invariably characterized as regular arrays of spheres or cubes rather than random irregularly shaped particles. The effect of particle size distribution on the shape and size of void spaces is not modeled, although it affects the thermal conductivity of the gas. Calculations of thermal performance based on simplified descriptions of the porosity distribution can be used to show the dependence of thermal resistance on interstitial gas pressure. The literature reviewed in this report provides a basis for predicting the interstitial gas pressure at which thermal conductivity begins to increase. The objective is to design filler material for powder insulation systems with ultrafine void spaces that will permit pressure increases without dramatic thermal conductivity increases.
Supplementary Notes Sponsored by Department of Energy, Washington, DC.
NTIS Title Notes Bibliography.
Category Codes 89G; 46; 88E
NTIS Prices PC A03/MF A01
Document Type NT
Cataloging Source NTIS/MT
Control Number 328010717
Origin NTIS
Type CAT