||Test Methods to Characterize Particulate Matter Emissions and Deposition Rates in a Research House.
McBrian, J. ;
Fortmann, R. ;
Guo, Z. ;
Mosley, R. B. ;
||ARCADIS Geraghty and Miller, Inc., Research Triangle Park, NC.;Environmental Protection Agency, Research Triangle Park, NC. Air Pollution Prevention and Control Div.
Air pollution monitoring ;
Test methods ;
Residential buildings ;
Natural gas ;
||Some EPA libraries have a fiche copy filed under the call number shown.
||The paper discusses test methods to characterize particulate matter (PM) emission and deposition rates in a research house. In a room in the research house, specially configured for PM source testing, a high-efficiency particle air (HEPA)-filtered air supply system, used for positive pressurization of the room, minimizes PM infiltration from the outdoors and the rest of the house while a portable HEPA filter in the room reduces background PM prior to the start of source tests. A ceiling fan and portable air conditioner provide mixing and temperature control. Testing involves simultaneous real-time particle monitoring and integrated sampling. Particulate matter with aerodynamic diameters < 2.5 and 10 micrometers (PM2.5 and PM10, respectively) are collected on Teflon filters using size-selective cyclones operated at 16.7 L/min. Particle size distributions are measured with an electrical low-pressure impactor with 12 size fraction, from 0.030 to 10 micrometers in aerodynamic diameter.
||Presented at Engineering Solutions to IAQ Problems, Raleigh, NC., July 17-19, 2000. Sponsored by Environmental Protection Agency, Research Triangle Park, NC. Air Pollution Prevention and Control Div.
||Product reproduced from digital image. Order this product from NTIS by: phone at 1-800-553-NTIS (U.S. customers); (703)605-6000 (other countries); fax at (703)605-6900; and email at firstname.lastname@example.org. NTIS is located at 5285 Port Royal Road, Springfield, VA, 22161, USA.
|NTIS Title Notes
||Rept. for Oct 99-May 00.
||PC A03/MF A01