Record Display for the EPA National Library Catalog


OLS Field Name OLS Field Data
Main Title Foam separation of kraft pulping wastes /
CORP Author Georgia Kraft Company. Research and Development Center.
Publisher Federal Water Pollution Control Administration, Dept. of the Interior,
Year Published 1969
Report Number EPA/810/R-69-007; 12040 EUG 10/69; FWPCA-DAST-3; WPRD-117-01-68; 03350
Stock Number PB-189 160
OCLC Number 05574063
Subjects Sewage--Purification--Foam fractionation. ; Paper industry--Waste disposal.
Additional Subjects ( Water pollution ; Paper industry) ; ( Wastes(Industrial) ; Wood pulp) ; Foams ; Surface-active substances ; Economics ; Kraft paper ; Biochemical oxygen demand ; Sulfate pulping ; Tall oil
Internet Access
Description Access URL
Library Call Number Additional Info Location Last
EJBD ARCHIVE EPA 810-R-69-007 Headquarters Library/Washington,DC 05/09/2011
EJBD  EPA 810-R-69-007 Headquarters Library/Washington,DC 05/14/2014
EKAD  12040 EUG 10/69 Region 4 Library/Atlanta,GA 08/16/2002 DISPERSAL
EKAD  TD754.5.G35 1969 Region 4 Library/Atlanta,GA 08/16/2002 DISPERSAL
ELBD RPS EPA 810-R-69-007 repository copy AWBERC Library/Cincinnati,OH 10/17/2014
NTIS  PB-189 160 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation ix, 81 pages : graphs ; 28 cm.
Laboratory studies of foam separation were conducted to determine the feasibility of this process for reducing B.O.D., solids content, and foaming tendency of clarified kraft mill effluent. Since kraft pulping wastes have a natural tendency to foam, it was expected that the foaming process, which has been found to be useful in treating domestic wastes, might have applications in treatment of these effluents. Both continuous flow and batch experiments were conducted, and liquid and foam heights, liquid feed rates, air sparging rates, and temperature were varied over wide ranges. The B.O.D. reduction in the treated liquid was disappointingly small, averaging less than 5 per cent, and the B.O.D. enrichment in the foam phase was in most cases less than 1.5 times that of the feed. Foaming tendency, however, was significantly reduced by the intentional foaming process. The experimental results suggest that the reductions in B.O.D. and foaming tendency were related to the separation of the tall oil components of the waste. Apparently the remaining B.O.D.- producing materials were not surface active and did not attach themselves to the surface-active components. The cost of using a foam process on kraft mill wastes is estimated to be four to five cents per 1000 gallons of feed; this cost is exclusive of further processing of the concentrated foamate. Based on control of foaming tendency alone, the process would be unattractive from a cost standpoint. (Author)
"EPA/810-R-69-007." "October 1969." Program no. 12040 EUG, grant no. WPRD 117-01-68. Includes bibliographical references (pages 49-50).