Record Display for the EPA National Library Catalog

RECORD NUMBER: 31 OF 86

OLS Field Name OLS Field Data
Main Title Evaluation of electron microscopy for process control in the asbestos industry /
Author Gerber, R. M. ; Rossi., R. C.
Other Authors
Author Title of a Work
Rossi, Ronald C.
Rossi, R. C.,
CORP Author Aerospace Corp., Los Angeles, Calif.;Industrial Environmental Research Lab., Research Triangle Park, N.C.
Publisher Environmental Protection Agency, Office of Research and Development, Industrial Environmental Research Laboratory ; For sale by the National Technical Information Service,
Year Published 1977
Report Number EPA 600/2-77-059; ATR-77(7552)-1; EPA-R-802394; EPA-ROAP-21AFA-011
Stock Number PB-266 091
OCLC Number 03814692
ISBN pbk.
Subjects Asbestos industry. ; Electron microscopes.
Additional Subjects Asbestos ; Fines ; Air pollution control ; Measuring instruments ; Process control ; Particle size distribution ; Particles ; Performance evaluation ; Concentration(Composition) ; Design criteria ; Dust control ; Industrial wastes ; Fibers ; Electron microscopy ; Monitoring ; Comparisons ; Air pollution sampling ; Transmission electron microscopes ; Scanning electron microscopes
Internet Access
Description Access URL
http://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=91016P68.PDF
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
EJAD  EPA 600/2-77-059 Region 3 Library/Philadelphia, PA 06/02/2000
EKAM  EPA-600/2-77-059 Region 4 Library/Atlanta,GA 11/20/1998
EKBD  EPA-600/2-77-059 Research Triangle Park Library/RTP, NC 06/20/2003
ERAD  EPA 600/2-77-059 Region 9 Library/San Francisco,CA 09/17/2012
ESAD  EPA 600-2-77-059 Region 10 Library/Seattle,WA 03/23/2010
NTIS  PB-266 091 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation viii, 47 p. : ill. ; 28 cm.
Abstract
The report gives results of an evaluation of the transmission electron microscope (TEM) and the scanning electron microscope (SEM) as potential tools for fine particle asbestos fiber counting for process control in the asbestos industry. The study defined the capabilities and limitations of the instruments in applications where asbestos specificity is not necessarily required, and where analysis cost must be minimal. The study showed that the microscopes are equally capable of counting all fibers in the full particle size distribution; but, for reasons of agglomeration and confusion with the filter texture, each microscope can observe only 75% of the distribution. In contrast, present standard light microscopy methods observe only the coarser 10% of the distribution, without resolving the fine fibers. Optimum asbestos fiber counting was done at 15,000 times magnification and at fiber concentrations on the filter between 40,000 and 80,000 fibers per sq mm. The minimum number of fibers counted to obtain high statistical confidence was 200 fibers per datum point. Standard techniques for filter sample preparation were found to have no effect for either instrument. Ashing of filters to remove non-asbestos fibers was responsible for 85% asbestos fiber loss.
Notes
"EPA-600/2-77-059". Prepared by the Aerospace Corporation under Grant No. R802394, ROAP No. 21AFA-001, Program Element No. 1AB015. "February 1977". Includes bibliographical references (p. 40-42).