Record Display for the EPA National Library Catalog

RECORD NUMBER: 2 OF 4

OLS Field Name OLS Field Data
Main Title Waste minimization assessment for a manufacturer of injection-molded car and truck mirrors /
Author Fleischman, M. ; Hensen, C. ; Looby, G. P. ; Kirsch, F. W.
Other Authors
Author Title of a Work
Fleischman, Marvin.
CORP Author Louisville Univ., KY. Dept. of Chemical Engineering. ;University City Science Center, Philadelphia, PA.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
Publisher U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory,
Year Published 1992
Report Number EPA/600-S-92-032; EPA-R-814903
Stock Number PB93-123032
OCLC Number 26987617
Subjects Waste minimization--Research--Tennessee. ; Rearview mirrors--Research--Tennessee. ; Automobiles--Rearview mirrors--Research--Tennessee.
Additional Subjects Waste management ; Pollution abatement ; Hazardous materials ; Plastics ; Injection molding ; Manufacturing ; Cost analysis ; Painting ; Sludge disposal ; Mirrors ; Motor vehicles ; Waste minimization ; Source reduction ; SIC 20-39
Internet Access
Description Access URL
http://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=30003V74.PDF
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
EHAM  EPA/600/S-92/032 Region 1 Library/Boston,MA 05/25/2016
EJAD  EPA 600/S-92-032 Region 3 Library/Philadelphia, PA 04/18/2011
EJBD ARCHIVE EPA 600-S-92-032 In Binder Headquarters Library/Washington,DC 10/30/2017
EJBD  EPA 600-S-92-032 c.1-2 Headquarters Library/Washington,DC 04/08/2013
EJED  EPA/600/S-92/032 OCSPP Chemical Library/Washington,DC 10/05/2001
ELBD RPS EPA 600-S-92-032 repository copy AWBERC Library/Cincinnati,OH 10/17/2014
EMBD  EPA/600/S-92/032 GWERD Library/Ada,OK 12/28/2001
NTIS  PB93-123032 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation 4 pages ; 28 cm.
Abstract
The WMAC team at the University of Louisville performed an assessment at a plant that manufactures injection - molded car and truck mirrors -- over 2.5 million/yr. Purchased parts and injection-molded plastic parts manufactured onsite are painted as needed and assembled. The team's report, detailing findings and recommendations, indicated that a large quantity of waste is generated by the painting process and that waste plastic also is generated in significant amounts. The greatest cost savings can be achieved in the plant by using an alternate method of disposing of the waste paint sludge generated in the paint booths.
Notes
"EPA/600-S-92-032." "Sept. 1992." Shipping list no.: 92-0610-P.