Record Display for the EPA National Library Catalog

RECORD NUMBER: 4455 OF 4951

OLS Field Name OLS Field Data
Main Title Synthetic resin adsorbents in treatment of industrial waste streams {microform} /
Author Benner, Linda S.
CORP Author Rohm and Haas Co., Spring House, PA.;Robert S. Kerr Environmental Research Lab., Ada, OK.
Publisher U.S. Environmental Protection Agency, Robert S. Kerr Environmental Research Laboratory,
Year Published 1983
Report Number EPA/600/2-84/105; EPA-R-807315
Stock Number PB84-199579
Subjects Factory and trade waste--United States
Additional Subjects Water pollution control ; Adsorbents ; Synthetic resins ; Organic compounds ; Regeneration(Engineering) ; Industrial waste treatment ; Substitutes ; Assessments ; Performance evaluation ; Nitrogen organic compounds ; Chlorine organic compounds ; Organic solvents ; Methyl alcohol ; Isotherms ; Toluene ; Nitrobenzenes ; Acetone ; Waste recycling ; Amberlite ; Ambersorb ; Diaion ; Filtrasorb ; Phenol/nitro ; Toluene/dinitro ; Ethylene/tetrachloro ; Propane/dichloro
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB84-199579 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation 144 p. ; 28 cm.
Abstract
The use of synthetic polymeric adsorbents for removal of organic pollutants from industrial waste streams is a viable alternative to more common treatment methods such as carbon adsorption. However, resin technology is not widely practiced due to the difficulty of selecting the appropriate synthetic adsorbent/regenerant combination for a particular application. This research program was undertaken to develop a simple, reliable laboratory test to assess the feasibility of using synthetic resin adsorbents for treatment of a given waste water stream. The new test method facilitates rapid screening of a large number of adsorbent/regenerant pairs. The test consists of exposing small bags of adsorbents in the actual waste stream for predetermined periods of time, followed by regenerating the exposed adsorbents. The batch portion of the test measures regenerated saturation capacity of any adsorbent/regenerant pair with a single analysis. The rate portion measures regenerated capacity as a function of time. Capacity data obtained by the test method were compared and correlated with data obtained by conventional isotherm tests and column experiments. In general, the batch test performs better than the isotherm test in predicting column saturation capacity of polymeric adsorbents.
Notes
"EPA-600/2-84-105" "May 1984." References: p. 109-110. Microform.