Record Display for the EPA National Library Catalog
RECORD NUMBER: 37 OF 68
|OLS Field Name||OLS Field Data|
|Main Title||International standards.|
|CORP Author||International Organization for Standardization.|
|Report Number||ISO/DIS 8178-1; ISO/DP 8178-2|
|Subjects||Engineering drawings--Standards ; Construction equipment--Standards ; Nuclear engineering--Standards ; Airplanes--Standards ; Agricultural industries--Standards ; Building materials--Standards ; Cement--Standards ; Engineering--Tools and implements--Standards ; Petroleum products--Standards ; Forest products--Standards ; Shipbuilding--Standards ; Mining engineering--Standards ; Heating--Standards ; Industrial equipment--Standards|
ISO 8178-1:2006 specifies the measurement and evaluation methods for gaseous and particulate exhaust emissions from reciprocating internal combustion (RIC) engines under steady-state conditions on a test bed, necessary for determining one weighted value for each exhaust gas pollutant. Various combinations of engine load and speed reflect different engine applications (see ISO 8178-4). ISO 8178-1:2006 is applicable to RIC engines for mobile, transportable and stationary use, excluding engines for motor vehicles primarily designed for road use. ISO 8178-1:2006 may be applied to engines used, for example, for earth-moving machines, generating sets and for other applications. In limited instances, the engine can be tested on the test bed in accordance with ISO 8178-2, the field test document. This can only occur with the agreement of the parties involved. It should be recognised that data obtained under these circumstances may not agree completely with previous or future data obtained under the auspices of ISO 8178-1:2006. Therefore, it is recommended that this option be exercised only with engines built in very limited quantities such as very large marine or generating set engines. For engines used in machinery covered by additional requirements (e.g. occupational health and safety regulations, regulations for powerplants), additional test conditions and special evaluation methods may apply. Where it is not possible to use a test bed or where information is required on the actual emissions produced by an in-service engine, the site test procedures and calculation methods specified in ISO 8178-2 are appropriate. ISO 8178-2:2008, together with ISO 8178-1 and ISO 8178-11, specifies the measurement and evaluation methods for gaseous and particulate exhaust emission from reciprocating internal combustion engines (RIC engines) under steady-state and transient conditions for field testing. ISO 8178-2:2008 is applied when RIC engines used in off-road vehicles, marine installations, generating sets, diesel rail traction or similar applications must be measured under field conditions or at site in order to determine the in-use compliance or when it is not possible to take the measurements under test-bed conditions or to use the test-bed measurement results.
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement of gaseous and particulate exhaust emissions; Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions ISO/DP 8178-2 Title varies slightly.