Record Display for the EPA National Library Catalog

RECORD NUMBER: 11 OF 44

OLS Field Name OLS Field Data
Main Title Engineering Application and Economics of LIMB (Limestone Injection/Multistage Burners).
Author Kaplan, N. ; Lachapelle, D. G. ; Chappell, J. ;
CORP Author Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab.
Year Published 1985
Report Number EPA/600/D-85/071;
Stock Number PB85-188910
Additional Subjects Air pollution control equipment ; Mathematical models ; Burners ; Cost analysis ; Performance evaluation ; Comparison ; Flue gases ; Sulfur oxides ; Nitrogen oxides ; Sorbents ; Economic analysis ; Capitalized costs ; Electric power plants ; Limestone injection multistage burners ; Flue gas desulfurization ; Coal fired power plants
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB85-188910 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 06/21/1988
Collation 19p
Abstract
The paper describes the use of an EPA LIMB cost model, in conjunction with cost and performance models for flue gas desulfurization (FGD), to compare these two technologies under similar premises. (NOTE: The performance goals of LIMB, EPA's acronym for Limestone Injection/Multistage Burners for use in SO2/NOx control for coal-fired boilers, are 50-60% reduction of SO2 and NOx for retrofit systems, and achievement of New Source Performance Standards (NSPS) for SO2 and NOx for application on new utility boilers. These performance requirements, furthermore, are to be achieved at significantly lower cost than that for FGD, the major control technology alternative.) For a new 500 MW unit burning 1.92% S coal and achieving control to meet NSPS, costs per ton of SO2 removed are estimated to be $1377, $771, and $921 for limestone FGD, lime spray drying, and LIMB using calcitic hydrate, respectively. At 0.48% S in the coal, these costs are estimated at $3715, $1954, and $1134 for limestone FGD, lime spray drying, and LIMB, respectively. For a 300 MW retrofit system, costs per ton of SO2 removed for wet limestone FGD and LIMB using calcitic hydrate on a 1.92% S coal application are $1359 and $844, respectively.