Record Display for the EPA National Library Catalog

RECORD NUMBER: 28 OF 71

OLS Field Name OLS Field Data
Main Title Inspection techniques for the fabrication of geomembrane field seams /
Author Landreth, R. E. ; Carson, D. A. ; Koerner, R. M.
CORP Author Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
Publisher U.S. Environmental Protection Agency,
Year Published 1991
Report Number EPA/530/SW-91-051
Stock Number PB92-109057
OCLC Number 24262842
Subjects Sanitary landfills--Linings.
Additional Subjects Inspections ; Hazardous materials ; Waste disposal ; Lining processes ; Seaming ; Land pollution abatement ; Quality assurance ; Quality control ; Construction ; Guidelines ; Specialized training ; Manuals ; Nondestructive tests ; Field tests ; Thermoplastic resins ; Seams(Joints) ; Adhesion ; Environmental engineering ; Performance standards ; Geosynthetic materials ; Land covers ; Geomembranes ; Capping ; Extrusion fillet seams ; Extrusion flat seams ; Hot wedge seams ; Hot air seams ; Chemical fusion seams ; Adhesive seams
Internet Access
Description Access URL
http://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=2000FC0H.PDF
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
EHAM  TD1064.I57 1991 Region 1 Library/Boston,MA 04/29/2016
EIAD  EPA/530/SW-91/051 Region 2 Library/New York,NY 12/20/1996
EJAD  EPA 530/SW-91-051 HWTIC Region 3 Library/Philadelphia, PA 09/20/1991
EJBD ARCHIVE EPA/530/SW-91/051 Headquarters Library/Washington,DC 04/30/2009
EJBD  EPA/530/SW-91/051 c.1-2 Headquarters Library/Washington,DC 03/10/2014
EKAM  EPA 530-SW-91-051 Region 4 Library/Atlanta,GA 12/17/1999
EKBD  EPA-530/SW-91-051 Research Triangle Park Library/RTP, NC 06/15/2001
EMBD  EPA/530/SW-91/051 GWERD Library/Ada,OK 08/06/1993
ESAD  EPA 530-SW-91-051 Region 10 Library/Seattle,WA 04/22/2005
NTIS  PB92-109057 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation xvi, 174 pages : illustrations, photographs ; 23 cm.
Abstract
The Technical Guidance Document is meant to augment the numerous construction quality control and construction quality assurance (CQC and CQA) guidelines that are presently available for geomembrane installation and inspection. It is focused on all current methods of producing geomembrane seams including HDPE and VLDPE, PVC, PVC-R, CSPE, CSPE-R, CPE, CPE-R, EIA and EIA-R. In general, the tone of most of the existing guidelines is to allow the installer almost complete freedom in making seams with the only conditions being that they pass: (1) destructive shear and peel tests to a stipulated strength, and (2) selected nondestructive tests. By developing a report somewhere between the typical CQC/CQA Documents and an installer's training manual, i.e., a 'Technical Guidance Document', it is hoped that this technical guidance document will provide meaningful insight for an inspector as to what the installer is trying to accomplish. At the same time, it might be also helpful to the installer in recognizing that others have an interest in their specific activity. After some introductory material, the manual presents six specific methods used for fabricating field seams of the types of geomembranes being most widely used for environmental control systems. They are the following: (1) extrusion fillet seams, (2) extrusion flat seams, (3) hot wedge seams, (4) hot air seams, (5) chemical fusion seams, and (6) adhesive seams.
Notes
"May 1991." "EPA/530/SW-91/051." "In cooperation with Risk Reduction Engineering Laboratory." "Project officers Robert E. Landreth and David A. Carson." "Cooperative agreement no. CR-815692." Includes bibliographical references (pages 163-164).