Main Title |
Sampling oil-water mixtures at OHMSETT / |
Author |
Borst, Michael.
|
Publisher |
U.S. Environmental Protection Agency, Hazardous Waste Engineering Research Laboratory, |
Year Published |
1988 |
Report Number |
EPA/600-S2-87-073 |
OCLC Number |
21316607 |
Subjects |
Emulsions--Sampling ;
Water--Sampling
|
Internet Access |
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
EJBD |
EPA 600-S2-87-073 |
In Binder |
Headquarters Library/Washington,DC |
11/06/2018 |
ELBD ARCHIVE |
EPA 600-S2-87-073 |
In Binder Received from HQ |
AWBERC Library/Cincinnati,OH |
10/04/2023 |
|
Collation |
2 unnumbered pages ; 28 cm |
Notes |
Caption title. At head of title: Project summary. Distributed to depository libraries in microfiche. "Jan. 1988." "EPA/600-S2-87-073." |
Contents Notes |
"This report describes procedures developed for sampling oil and water mixtures. Two procedures for sampling in containers are discussed: grab and stratified sampling. Both of these techniques require stripping free-standing water from the container bottom. The grab sample technique requires that the remaining fluids be thoroughly mixed before immersing a bottle through the resulting homogeneous emulsion. The stratified sampling procedure uses a sample thief to capture a segmented cross-section of the remaining fluids. Two procedures for sampling flowing fluids were tested. The two sampling tubes tested were installed immediately downstream of a series of static mixers and a centrifugal pump. The sampling ports were a simple slotted tube and pilot-shaped tube." |