Main Title |
Review of industry test reports for refinery MACT II regulation |
Author |
Abbgy, S. J. ;
Holdren, M. W. ;
Finegold, J. K. ;
Holowecky, P. M.
|
Other Authors |
|
CORP Author |
Battelle, Columbus, OH.;Environmental Protection Agency, Research Triangle Park, NC. Emissions, Monitoring, and Analysis Div. |
Publisher |
Emissions, Monitoring and Analysis Division, Office of Air Quality Planning and Standards, U.S. Environmental Protection Agency, |
Year Published |
1999 |
Report Number |
EPA-454/R-99-052; EPA-68-D-99-009 |
Stock Number |
PB2000-100251 |
OCLC Number |
44186780 |
Additional Subjects |
Petroleum refineries ;
Air pollution sources ;
Emission ;
Air pollution monitoring ;
Test methods ;
Petroleum refining ;
Air pollution sampling ;
Air pollution control equipment ;
Auditing ;
Data acquisition ;
Data analysis ;
Data quality ;
Quality assurance ;
Validation ;
Tables(Data) ;
MACT(Maximum Achievable Control Technology) ;
Maximum Achievable Control Technology
|
Internet Access |
|
Holdings |
Library |
Call Number |
Additional Info |
Location |
Last Modified |
Checkout Status |
EKBD |
EPA-454/R-99-052 |
|
Research Triangle Park Library/RTP, NC |
06/16/2000 |
NTIS |
PB2000-100251 |
Some EPA libraries have a fiche copy filed under the call number shown. |
|
07/26/2022 |
|
Collation |
iv, 10, {93} leaves : ill. ; 28 cm. |
Abstract |
In order to set Maximum Achievable Control Technology (MACT) standards, the US EPA is gathering emissions data from industry sources. These test data must be evaluated for appropriate Quality Assurance/Quality Control (QA/QC) procedures. For the Refinery MACT II standard, test reports are being gathered from industry tests, and must be evaluated before data can be used for standard-setting purposes. This final report describes work conducted by Battelle staff to evaluate 55 test reports gathered from various refinery tests. For this report, Battelle has reviewed and evaluated the 55 test reports and has provided a brief summary report for each refinery test report. Each summary report is organized in tabular format and includes the following heading: pollutant measured, EPA air method that was used, deviations from the EPA method, other methods used, method validation, audit conducted, method QA/QC requirements achieved, and sample data calculations conducted. Each industry test report also received an overall rating based upon the tabular information. Finally, a brief summary on the overall quality of the data is included with each summary report. |
Notes |
Title from cover. EPA Project Officer: Kathy Weant. EPA Work Assignment Manager: Rima Dishakjian. "September 1999." "EPA-454/R-99-046." PB2000-100251. Includes bibliographical references. |