Record Display for the EPA National Library Catalog

RECORD NUMBER: 16 OF 24

OLS Field Name OLS Field Data
Main Title Permit guidance document : pulp, paper, and paperboard manufacturing point source category (40 CFR 430).
CORP Author Environmental Protection Agency, Washington, DC. Office of Water.
Publisher United States Environmental Protection Agency, Office of Water,
Year Published 2000
Report Number EPA-821-B-00-003
Stock Number PB2002-106590
OCLC Number 47655509
Subjects Factory and trade waste--Environmental aspects--United States ; Paper--Standards--United States
Additional Subjects Permits ; Air pollution standards ; Water pollution standards ; Paper industry ; Paper making ; Air emissions ; Pulp mills ; Paper mills ; Chemical effluents ; Industrial waste treatment ; Waste water ; Pollution regulations ; Point sources ; Effluent discharges ; Permit guidance documents
Internet Access
Description Access URL
https://nepis.epa.gov/Exe/ZyPDF.cgi?Dockey=P1009K1H.PDF
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
EHAD  EPA/821/B-00-003 Region 1 Library/Boston,MA 01/11/2002
EIAD  EPA-821-B-00-003 Region 2 Library/New York,NY 11/14/2003
EJBD  EPA 821-B-00-003 Headquarters Library/Washington,DC 07/27/2001
NTIS  PB2002-106590 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. NTIS 01/01/1988
Collation 1 v. : ill. ; 28 cm.
Abstract
On April 15, 1998, the U.S. Environmental Protection Agency (EPA) promulgated revised regulations for the pulp, paper, and paperboard category to control both effluent discharges and air emissions. The promulgation of the revised regulations marks the completion of the first of three phases of the Cluster Rules. As part of Phase I, EPA established effluent limitations guidelines and standards under 40 CFR Part 430 for the following two subcategories: Subpart B - Bleached Papergrade Kraft and Soda; and Subpart E - Papergrade Sulfite. At the time of publication of this guidance manual, EPA is continuing with Phases II and III to establish revised effluent limitations and standards for the remaining subparts. Over the next several years, EPA plans to complete these phases and will update 40 CFR Part 430 after the completion of each phase. The purpose of this guidance document is to help you, the permit writer, develop appropriate National Pollutant Discharge Elimination System (NPDES) permits and pretreatment requirements for mills with operations in Subparts B and E. The material presented is intended solely for guidance and does not alter any statutory requirements. For an overview of the NPDES and National Pretreatment Programs, you may refer to Section 2 of this document or to the U.S. EPA NPDES Permit Writer's Manual (EPA-833-B-96- 003) for more detailed information.
Notes
"May 2000." Includes bibliographical references.