Record Display for the EPA National Library Catalog

RECORD NUMBER: 5 OF 5

OLS Field Name OLS Field Data
Main Title Evaluation of Sulfur Capture Capability of a Prototype Scale Controlled-Flow/Split-Flame Burner.
Author Vatsky, J. ; Schindler, E. S. ;
CORP Author Foster Wheeler Energy Corp., Livingston, NJ.;Environmental Protection Agency, Research Triangle Park, NC. Air and Energy Engineering Research Lab.
Year Published 1987
Report Number REPT-5-E-3; EPA-68-02-3906; EPA/600/7-87/003;
Stock Number PB87-168670
Additional Subjects Air pollution control equipment ; Sulfur dioxide ; Burners ; Combustion ; Concentration(Composition) ; Nitrogen oxides ; Coal ; Prototypes ; Stationary sources
Holdings
Library Call Number Additional Info Location Last
Modified
Checkout
Status
NTIS  PB87-168670 Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy. 06/21/1988
Collation 190p
Abstract
The report describes the sulfur capture potential during combustion of limestone copulverized with a high sulfur eastern bituminous coal, using Foster Wheeler's commercial Controlled-Flow/Split-Flame (CF/SF) low NOx, internally staged burner. Sulfur capture was optimized by using overfire air and two proprietary flame temperature control methods. Additionally, the effects of excess air changes, load changes, and different calcium/sulfur mole ratios (Ca/S) were evaluated. Two flame temperature reduction methods were used to reduce the flame temperature to minimize dead burning of limestone and thus enhance SO2 capture. Although the use of flame temperature reduction and overfire air improved the SO2 capture, the optimum SO2 capture of 29% at a Ca/S of 2.15 was low. Operation under optimum SO2 capture mode resulted in measured NOx emissions of 0.19 lb/million Btu; CO was less than 25 ppm at an excess oxygen level of 3.0%.