||Emissions of metals, chromium and nickel species, and organics from municipal wastewater sludge incinerators. Volume VII, Site 8 emission test report /
Segall, Robin R. ;
DeWees, W. G.
||Entropy Environmentalists, Inc., Research Triangle Park, NC. ;DEECO, Inc., Cary, NC. ;Lewis (F. Michael), Mountain View, CA.;Environmental Protection Agency, Cincinnati, OH. Risk Reduction Engineering Lab.
|| Risk Reduction Engineering Laboratory, Office of Research and Development, U.S. Environmental Protection Agency,
||EPA/600/4-92/003G; EPA-68-CO-0027; EPA/600/R-92/003G
Sewage sludge--Incineration--Environmental aspects. ;
Chromium compounds--Environmental aspects. ;
Nickel compounds--Environmental aspects. ;
Organic compounds--Environmental aspects.
Sewage sludge ;
Sludge disposal ;
Air pollution sampling ;
Air pollution detection ;
Chemical analysis ;
Site surveys ;
Air pollution control equipment ;
Electrostatic precipitators ;
Polychlorinated dibenzofurans ;
Continuous sampling ;
Fluidized bed processing ;
Organic compounds ;
Polychlorinated dibenzodioxins ;
Continuous emission monitoring
||Most EPA libraries have a fiche copy filed under the call number shown. Check with individual libraries about paper copy.
||351 pages : illustrations ; 28 cm
The Site 8 facility is a 24.1 million gallons per day (MGD) secondary biological treatment plant with a 0.1 MGD septage handling facility. The wastewater influent comes from predominantly (90 percent) domestic sources. The treatment facility serves a population of approximately 175,000. All 22 tons per day of sludge solids are dewatered by two belt presses to a concentration of 22 to 25 percent solids. Approximately 15 to 17 tons of solids are dewatered by one press and fed to the fluidized bed incinerator. The air pollution control system associated with this incinerator consists of a water injection venturi, and an impingement tray scrubber. A pilot-scale wet eletrostatic precipitator had been installed and was tested. Volume 7 contains the appendices for volume 6. These are (1) Incinerator and Scrubber Operating Data; (2) Sampling and Analytical Methods; (3) Sample Calculations; (4) Analytical Data and Reports, and (5) Continuous Emission Monitoring Data Calibrations/One-min averages.